DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2710Vn not switching to PSTN line on power or ADSL failure

  • andrewbracewell
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Aug 2009 21:37 #57395 by andrewbracewell
have just purchased the 2710Vn and setup voip (sipgate). All works well but it doesn't switch the phone line to the PSTN line when either the ADSL line is down or mains power loss. It does say that it should do this in the manual. Anybody else have the same problem. Firmware is 3.2.3.1

Thanks

Please Log in or Create an account to join the conversation.

More
26 Aug 2009 10:56 #57405 by macavity
What phone port are you connecting to ? I believe it's port 2 that does failover.

Please Log in or Create an account to join the conversation.

  • andrewbracewell
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Aug 2009 10:59 #57406 by andrewbracewell
Thanks
I have also had a reply from Draytek support confirming that its port 2 is the failsafe port. Its a shame they didn't say that in the manual.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami