DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Unable to set router internal IP, subnet

  • rcs1000
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Aug 2009 22:59 #57198 by rcs1000
Hi,

I am replacing an existing Draytek router and need to have as my subnet:

10.3.1.1
255.255.255.0

But when I enter these details into the Lan - General Setup tab and click 'OK', the router just ignores these details and resets back to 192.168.1.1 etc.

What am I doing wrong>

Thanks.

Robert

Please Log in or Create an account to join the conversation.

  • rcs1000
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Aug 2009 09:27 #57217 by rcs1000
Replied by rcs1000 on topic Unable to set router internal IP, subnet
Sorry to bump, but it's very annoying: I enter all the details, click OK, and all the settings revert immediately back to 192.168.etc.

I don't even get an error message.

Please Log in or Create an account to join the conversation.

More
14 Aug 2009 13:06 #57221 by rolandrat
Replied by rolandrat on topic Unable to set router internal IP, subnet
What firmware you using, reason I ask is one of the firmwares in the past I used caused the web interface to behave bad, ignoring input, saying thing were wrong when they were fine.
Also possibly try using a different browser, chrome or firefox (assuming your using IE)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami