DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Static Routes between 2 subnets.....

  • gekko_uk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Jul 2009 11:25 #56729 by gekko_uk
Static Routes between 2 subnets..... was created by gekko_uk
Hello,

I have had a quick search but not much luck.

I have 2 x Draytek devices + 2 Lans – 1 x 2800 Cable Router and 1 x 2950 Device with attached ADSL modem.
Both work themselves fine.

Ip layout is
Draytek 2800 – 192.168.2.1
Draytek 2950 – 192.168.3.1

Both have different internet connections etc and work independently well.
I would like it so that clients on the 2.1 subnet can access systems on the 3.1 subnet and vice versus.

I have set static routes up as follows:

On 2800 –
Status/Action – Active/Add
Destination IP – 192.168.3.0
Subnet Mask – 255.255.255.0
Gateway IP Add – 192.168.3.1

On 2950 –
Status/Action – Active/Add
Destination IP – 192.168.2.0
Subnet Mask – 255.255.255.0
Gateway IP Add – 192.168.2.1

I have checked routing tables via telnet and these are all listed correctly.

If I try and ping a 3.0 address from 2800 it hits 3.1 router then * * * out.

Similarly if I do the same from the 2950 to 2.0.

Can anyone help?

Please Log in or Create an account to join the conversation.

  • gekko_uk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jul 2009 01:07 #56757 by gekko_uk
Replied by gekko_uk on topic Static Routes between 2 subnets.....
anyone?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami