DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

3300v Backup WAN

  • risbee
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Jun 2009 09:31 #56510 by risbee
3300v Backup WAN was created by risbee
Hi,
I have a 3300v configured with 2x public ADSL internet connections, configured as follows:

WAN1


Backup-Master
PPPoE Configuration (ADSL presented via Draytek 100 Ethernet modem)

WAN2


Backup-Slave
Static Configuration (ADSL Netgear router, Draytek recieves a single Public IP address on the WAN2 interface)

If the WAN1 interface should fail the WAN2 automatically takes over. This works fine in principle, however we have services that must run on WAN1 for reasons of IP address allocation etc.
The problem is when WAN1 comes back up the 3300v doesn't automatically fail back over to this interface. The only way to get it up and running again is to hard-power on/off the firewall. Is there a way around it. It seems to failover perfectly fine but I cant establish a mechanish to get it to fail back again.

Thanks,
Phil

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami