DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 1st WAN IP without NAT 2nd with NAT.

  • peter.vrba
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Jun 2009 13:25 #56426 by peter.vrba
2820 1st WAN IP without NAT 2nd with NAT. was created by peter.vrba
Hi Guys,
Hope you can help me. I have 2820 FW:3.3.1.2
I'm trying to set it up with 2 static WAN IP's

I need to 1st WAN IP without NAT pass thru to the IP card in phone system
and 2nd with NAT and Firewall and DHCP for normal network.

is it possible?

also I have setup remote management on port 8080 and is most of the time timing out. this is third 2820 I have setup and all of them have the same issue. But that's minor.

thanks for any suggestions.

Peter

Please Log in or Create an account to join the conversation.

More
02 Jul 2009 08:40 #56550 by mtechsystems
Replied by mtechsystems on topic 2820 1st WAN IP without NAT 2nd with NAT.
Hi Peter,

This is fairly simple.... goto LAN, and set the 2nd IP Address for routing to be the 2nd IP address in your Public range, then setup the WAN interface on your telephone system to be one of the other addresses in your public range with its gateway the 2nd IP address which you have assigned to the 2820, Then in Firewall >> Filter Setup create a new filter to allow the ports through the firewall If you want screenshots let me know.

Please Log in or Create an account to join the conversation.

  • peter.vrba
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Jul 2009 13:06 #56554 by peter.vrba
Replied by peter.vrba on topic 2820 1st WAN IP without NAT 2nd with NAT.
Hi mtechsystems,

Thanks for your reply. i found the solution under DrayTek FAQs.
Exactly the same as yours. It's working perfectly.

Thanks anyway.

Please Log in or Create an account to join the conversation.

More
02 Jul 2009 14:01 #56556 by mtechsystems
Replied by mtechsystems on topic 2820 1st WAN IP without NAT 2nd with NAT.
No problem.... Pleased you have sorted it.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami