DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820N router with ZTE MF622 - does'nt work -uk

  • mick171
  • Topic Author
  • Offline
  • New Member
  • New Member
More
18 Jun 2009 15:58 #56398 by mick171
Router running at software level 3.3.1.2_232201.
WAN2 is connected to my virgin modem and works fine.

At what point should the usb light come up if at all?

I plug the usb device in.
No usb light somes on
I configure WAN2 to say 3G usb modem- ok it

select internet access and selec WAN2
I enable the PPP client mode.
Tried seveal APN setttings and the default.
No usb light comes up. No wan2 comes up nothing.
The modem looks likes its doing something, it has a green light come up.

Another question: The usb cable has 2 plugs one end. I can get the modem to work on my PC only using 1 usb plug, but it also works on my Pc using 2 plugs. Obvioulsy the router only has one usb port. Do I need a special cable or something?

Can some one please help... tell what lights they get and when..

mick

Please Log in or Create an account to join the conversation.

More
26 Jan 2010 20:51 #60082 by apotts
After a monumental email trail with support (very helpful they are too) it transpires that the most recent firmware that works with the ZTE MF622 (3 dongle) and my 2820n is 3.3.0.1 (Feb 6th, 2009). Anything more modern, right up to 3.3.4 (RC4A) is broken.

Set the APN as 3internet, and off you go. You may need to trawl the FTP site for the old firmware.

Please Log in or Create an account to join the conversation.

More
03 Feb 2010 10:34 #60278 by puregeordie
Replied by puregeordie on topic 2820N router with ZTE MF622 - does'nt work -uk
Thats shocking.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami