DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

port forwarding

  • jenodorf
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Jun 2009 15:57 #56359 by jenodorf
port forwarding was created by jenodorf
Hi

On a lan I can log onto outlook webaccess using

http://localhost/exchange --- no problem

However from the web I get a page not found. So I'm assuming the issue is with port forwarding?

I've gone into port forwarding and setup external port 80 to forward to internal port 80 on the exchange servers IP address
I'veset it up on both tcpip and udp

Is there something else I should have done?

thanks

Ian

Please Log in or Create an account to join the conversation.

More
16 Jun 2009 17:20 #56360 by louis-m
Replied by louis-m on topic port forwarding
try port 443 (https)
close port 80!
make sure remote management isn't set on the router or change those ports.

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • jenodorf
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Jun 2009 22:30 #56362 by jenodorf
Replied by jenodorf on topic update
Thanks for that. I turend off remote admin and now I see a username and password box. Using a username and password gets me nowhere but at least I can now see the exchange server.

Once I get it functional I will as you suggest change it to port 443

but at the moment I'm happy to have moved forward a little bit.

cheers

Ian

Please Log in or Create an account to join the conversation.

More
17 Jun 2009 00:05 #56365 by louis-m
Replied by louis-m on topic port forwarding
do not enable access to exchange on port 80. the permissions are set to prevent this.
close 80 and open 443. you will be able to access exchange then.

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami