DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2800VG blocking incoming IP addresses

More
18 Jun 2009 20:12 #56405 by lorian
Replied by lorian on topic 2800VG blocking incoming IP addresses
IIRC the default is all port. you might wanna check in the manual though, or with a quick test.

Please Log in or Create an account to join the conversation.

  • nick555
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Jun 2009 03:09 #56409 by nick555
Replied by nick555 on topic 2800VG blocking incoming IP addresses

Lorian wrote: IIRC the default is all port. you might wanna check in the manual though, or with a quick test.



There's a manual? :shock:

Thanks, I'll run a test. I appreciate your help.

Please Log in or Create an account to join the conversation.

More
19 Jun 2009 07:08 #56410 by lorian
Replied by lorian on topic 2800VG blocking incoming IP addresses
http://support.netcentral.co.uk/documents/V2800_UserGuide.pdf

Page 52

"If the Start Port is empty, the Start Port and the End Port column will be
ignored. The filter rule will filter out any port number."

Please Log in or Create an account to join the conversation.

  • nick555
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Jun 2009 09:35 #56415 by nick555
Replied by nick555 on topic 2800VG blocking incoming IP addresses
Thanks for the link - that will save a lot of questions! 8)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami