DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek rack mount

  • miktdish
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 May 2009 15:31 #55972 by miktdish
Draytek rack mount was created by miktdish
Hi all.
I have just bought a 2820 and the rack-mount.
Anyone know how the two fit together ??

It appears that the router will only sit with the power input to the front and have all 4 rubber feet in the hole.

The other way round and it doesn't fit in the hole at all.
How is it supposed to be fixed to the plate ??

Is there something missing from the kit (it was just the bit of bent metal in the box) ?

Any help appreciated :)

--
Mik

SSETiC

Please Log in or Create an account to join the conversation.

More
22 May 2009 17:27 #55977 by markm4
Replied by markm4 on topic Draytek rack mount
The power cable goes tot he back and the LAN sockets at the front.

Then place the rack mount on the floor and slide the modem into the rack fro above. You will see some grills in the side of the modem the rack fits between the 1st set of these grills.

Please Log in or Create an account to join the conversation.

  • miktdish
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 May 2009 22:47 #55982 by miktdish
Replied by miktdish on topic Draytek rack mount
I think we are talking about a different bit of equipment here. The rack mount is simply a plate with a hole in the base and two "wings" bent up at 90 degrees forming the front with Draytek stamped on the right hand side.

The tray is silver in colour.

The 2820 does not sit in the hole when the power cable is at the back.
I think I have the wrong bit ... is there a photo somewhere ?

--
Mik

SSETiC

Please Log in or Create an account to join the conversation.

More
23 May 2009 10:29 #55986 by markm4
Replied by markm4 on topic Draytek rack mount
No, I have a 2820 too.

Place the rack mount on the floor and hold the modem in both hands from above.

With the LAN sockets at the front of the router and the draytek logo at the front of the rack mount slide the modem onto the rack mount between the grills in the side of the router.

Or in other words slide the two folded up bits of the rack mount kit into the grills in the side of the router. The rack mount bracket fits into the modem.

This would be much easier with a picture!

Please Log in or Create an account to join the conversation.

  • miktdish
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 May 2009 12:09 #56028 by miktdish
Replied by miktdish on topic Draytek rack mount
Pictures would be a great help, but I understand why they are not allowed.

If I understand you correctly this would mean that the 2820 sits proud of the rack mount ?

Sticking out the front, stopping the door from closing and offering a handy loop of cable to snare innocent passers-by ???

// i'm in Venezuela this week, when I get back i'll give this a go. If it does do the above i think a letter of complaint and a refund will be in order //

--
Mik

SSETiC

Please Log in or Create an account to join the conversation.

More
27 May 2009 10:57 #56056 by macavity
Replied by macavity on topic Draytek rack mount
I've found a pic on the Draytek web site
http://www.draytek.co.uk/products/image/v2820_bracketed.jpg

Shouldn't stop a door from closing, it only about 1-2cm in front of the plate and normally there would be much more space used up by a 24 port switch after the ethernet cables have been plugged in.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami