DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Using Draytek 2800 with Smoothwall

  • harry@bh-cc.com
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 May 2009 11:31 #55731 by harry@bh-cc.com
Using Draytek 2800 with Smoothwall was created by harry@bh-cc.com
Hi, i will shortly be putting a smoothwall on our network but will need to configure the draytek to simply pass all traffic to the smoothwall rather than doing nat and firewall etc, having taken a look at the user manual iam still no wiser on the method to achieve this, can it be done with this router?, any help with this would be greatly appreciated.
Many Thanks
Harry

Please Log in or Create an account to join the conversation.

More
12 May 2009 12:00 #55734 by louis-m
Replied by louis-m on topic Using Draytek 2800 with Smoothwall
use the 2nd subnet feature or put the smoothwall in a dmz.

see here:
http://www.draytek.co.uk/support/kb_vigor_2ndsubnet.html#disablenat

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • harry@bh-cc.com
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 May 2009 22:07 #55748 by harry@bh-cc.com
Replied by harry@bh-cc.com on topic Using Draytek 2800 with Smoothwall
Thanks Louis, I will try the Dmz option.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami