DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820 Series Routing Traffic Outbound

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2009 10:01 #55689 by testsubjec
Vigor 2820 Series Routing Traffic Outbound was created by testsubjec
Hi folks,

I am wanting to configure my router so that outbound traffic on ports 25, and 110 go out on our fixed IP (217.xxx.xxx.xxx) and everything else goes out on our dynamic ip (81.xxx.xxx.xxx).

We only have the one ADSL connection with BT who provide us with a dynamic IP and one fixed IP.

We also have a number of inbound connections using the fixed IP (RDP, CCTV, etc).

Thanks

Please Log in or Create an account to join the conversation.

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 May 2009 23:21 #55710 by testsubjec
Replied by testsubjec on topic Vigor 2820 Series Routing Traffic Outbound
I am really struggling with this and would greatly appreciate any help.

Thanks

Please Log in or Create an account to join the conversation.

More
11 May 2009 09:01 #55715 by louis-m
Replied by louis-m on topic Vigor 2820 Series Routing Traffic Outbound
the inbound connections will reply on the external ip requested unless "join nat pool" is enabled.
i'm not aware of a way you can force port based traffic through a certain ip.
sure you can restrict traffic via outbound firewall rules but this isn't the same as routing it outbound.
with dual wans, its easy too but with a single wan i'm not sure.

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami