DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 load balancing

More
24 Apr 2009 17:33 #55498 by louis-m
Replied by louis-m on topic 2820 load balancing
on a 2950, i've got the load balance set to:

192.168.16.10-99 >wan1
192.16816.100-200 >wan2

nothing else changed from default.... no ports etc and it works fine.
maybe its due to the start ip and end ip being the same?

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • wizardict
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Apr 2009 13:17 #55507 by wizardict
Replied by wizardict on topic 2820 load balancing
"In your load balance policy rule did you specify destination port start and end?"
I have tried it specifying a port and not, both with the same results.


"Also I found (on a 2950) that I had to specify the Downlink and Uplink speeds on WAN, General Setup for auto load balancing to work."
The thing is I don't really want auto load balancing, I want to specify which IP's use which WAN port.

"maybe its due to the start ip and end ip being the same?"
I changed my rule to:
192.168.1.99 > 192.168.1.101 > WAN2

192.168.1.100 still uses WAN1 for all traffic.

Any other ideas? I'm completely stuck with this now, if there weren't other people on here that had these working I would be saying they don't work at all!

Please Log in or Create an account to join the conversation.

More
25 Apr 2009 16:37 #55513 by louis-m
Replied by louis-m on topic 2820 load balancing
out of idea's there. everything looks ok. is the adsl modems using bridge or double nat?

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • wizardict
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
28 Apr 2009 18:30 #55568 by wizardict
Replied by wizardict on topic 2820 load balancing
It's a Linksys modem in bridged mode, so everything is controlled by the Draytek.

Please Log in or Create an account to join the conversation.

More
28 Apr 2009 19:20 #55569 by louis-m
Replied by louis-m on topic 2820 load balancing
long shot but.....
try changing the pc ip adress to something other than 192.168.1.100 eg 192.168.1.90 etc and set the load balance accordingly just to see what happens.

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • wizardict
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
13 May 2009 10:56 #55751 by wizardict
Replied by wizardict on topic 2820 load balancing
Thanks Louis but yeah it was a long shot, no good unfortunately. I'm starting to think there's something wrong with this router.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami