DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2500V won't start up unless...

More
17 Apr 2009 20:13 #55390 by kimb
I have a 2500v connected to Netgear 4 port hub. When I switch on the 2500v in the morning, it refuses to boot up unless I wait around 20sec then switch on the Netgear hub. Sometimes it won't start when the hub is switched on but starts when I switch the hub off again. With nothing connected to the router it won't start up. Any idea's as to what's wrong with the router? Has anybody come across this before?

Thanks Kim

Edit: Firmware V2.5.9 ASDL firmware 3.27 AnnexA

Vigor2500v

Please Log in or Create an account to join the conversation.

More
21 Jul 2009 15:21 #56812 by kimb
Replied by kimb on topic Solution
With the help of DrayTek Support I have identified the problem, a faulty ac / dc adapter. Now all that's left is for me to find a replacement 15v 1.2a ac /dc adapter.

Thanks to Andrew in support for his very quick help.

Vigor2500v

Please Log in or Create an account to join the conversation.

More
21 Jul 2009 17:42 #56818 by njh
Replied by njh on topic Vigor 2500V won't start up unless...
It is a bit OTT but this one from Maplin should do the job for £20.

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

More
22 Jul 2009 10:00 #56825 by kimb
Replied by kimb on topic Vigor 2500V won't start up unless...
Thanks for that, it is probably a bit large. I have found one at the bottom of this page that might do.


http://www.beststuff.co.uk/acdc_adapters.htm

Vigor2500v

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami