Hello,
Firmware 2.7.3.3_1311302,
I have a little problem with the second PVC.

In germany the ISP 1&1 use the 2 second PVC for VOIP.
I have two question about this:

1)How I can setup: 1.PVC for internet, 2.PVC for VOIP? Or is there no necessity to setup this?

2)It seems to me that the Multi-PVC selection drop down box on the setting page PPPoE / PPPoA store only the settings below this drop down box for each PVC.
But this 1&1 ISP need two different usernames (1und1/xxx@online.de and V1und1/xxx@online.de )for each PVC.
Is there any workaround, telnet or an english firmware?

Peter

same here with a second pvc for voip trafic. any solution?

It's not an option used in the UK AFAIK. My 2700 certianly doesnt support it. Try emailing support <at> draytek.com but expect to be disappointed.

I have posted it here too:
http://www.forum.draytek.co.uk/viewtopic.php?t=12595&

You think this is not enough and I should report it directly to the support too?

Peter

Lastwebpage wrote: I have posted it here too:
http://www.forum.draytek.co.uk/viewtopic.php?t=12595&

You think this is not enough and I should report it directly to the support too?

Peter

Email support directly.