DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

PSTN outgoing call crash

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
06 Mar 2018 09:49 #90952 by ghostworks
PSTN outgoing call crash was created by ghostworks
Most outgoing calls crash once end user answers call or just after , is this a setting i need to look into, as this started on the new firmware upgrade

NB. this issue applies to both Vigor BX2000ac Routers at 2 locations , using ext 101 to choose either lines Location A (PSTN) or Location B (PSTN)

/thanks

Please Log in or Create an account to join the conversation.

More
06 Mar 2018 10:16 #90953 by admin3
Replied by admin3 on topic Re: PSTN outgoing call crash
Which firmware are you seeing this with? 3.8.1.7 or 3.8.1.8?



Forum Administrator

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
06 Mar 2018 10:24 #90955 by ghostworks
Replied by ghostworks on topic Re: PSTN outgoing call crash
still checking all devices ie. the phone itself etc but latest BX firmware 3.8.1.8 it doesn't to it to all 100% on outgoing but most

Please Log in or Create an account to join the conversation.

More
06 Mar 2018 10:42 #90956 by admin3
Replied by admin3 on topic Re: PSTN outgoing call crash
Thanks for confirming, I'll check that with a BX2000 here.



Forum Administrator

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
06 Mar 2018 10:53 #90957 by ghostworks
Replied by ghostworks on topic Re: PSTN outgoing call crash
Currently only got the basic setup running as been to busy with normal work/business stuff to plan and implement for IVR , voice mail etc
Thought i'd make sure the basic stuff works and staff used to using lines first before complexing it further, anyone you recommend on Fiverr etc to setup and check remotely all pbx setup and implement IVR and voicemail etc

My Scenario

Location A :
Vigor BX200ac with Vigor 130 as got 2 x VDSL Ultima Plus lines ( 100Mb Down & 11MB Up )
Ext 101 ( Gigaset DX800a ) in location A - Reception/Office
Ext 102 ( Vtech Dect VSP600a ) in Location B - Reception/Office
Ext 103 ( Gigaset Maxwell10 ) in location C - Home Office
Ext 104 ( iPhone 10 - Zoiper ) Mobile user
Ext 105 ( iPhone 10 - Zoiper ) Mobile user


Location B :
Vigor BX200ac with Vigor 130 as got 2 x VDSL Ultima lines ( 35Mb Down & 1.5MB Up )
Ext 201 ( Gigaset DX800a ) in location A - Reception/Office
Ext 202 ( Vtech Dect VSP600a ) in Location B - Reception/Office
Ext 203 ( Gigaset Maxwell10 ) in location C - Home Office

VPN between Location A and B

Please Log in or Create an account to join the conversation.

More
06 Mar 2018 11:45 #90958 by admin3
Replied by admin3 on topic Re: PSTN outgoing call crash
Thanks for the details - I can't seem to reproduce the issue with a single PSTN line and one handset, it's possible something else is triggering it?
Could you contact the support team for assistance? sadly this isn't really the right place for troubleshooting and I think it would be necessary to look at testing the config to determine what's happening.

Otherwise, for now just use the 3.8.1.7 firmware that's on the DrayTek UK site.



Forum Administrator

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami