DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2860 POTS calls not ringing

More
23 May 2017 17:12 #88974 by kens
2860 POTS calls not ringing was created by kens
Hi All,

I've probably missed a simple setting somewhere. VOIP is working but incoming POTS calls on the Line port are not ringing either of the phones attached to the Phone1/2 ports. The LINE led on the router lights up but its not ringing on the phones.

If I dial #0 on one of the Phone1/2 phones I hear a relay click over and I get dial tone from the POTS line.

This should work shouldn't it?

Any ideas?

Thanks

Ken

Please Log in or Create an account to join the conversation.

More
24 May 2017 10:57 #88977 by admin3
Replied by admin3 on topic Re: 2860 POTS calls not ringing
Is the Phone port splitter the one that came with the 2860V router?

There's also a CLI command to enable / disable ringing on each handset:

Code:
> voip dsp pstnringfxs ? % voip dsp pstnringfxs [1|2] [on|off] % [1|2]:1.FXS1, 2.FXS2 % example: Disable PSTN ring FXS2 % > voip dsp pstnringfxs 2 off % ========PSTN ring FXS status======== PSTN ring FXS1 : enable PSTN ring FXS2 : enable >



Forum Administrator

Please Log in or Create an account to join the conversation.

More
24 May 2017 11:53 #88978 by kens
Replied by kens on topic Re: 2860 POTS calls not ringing
Hi Admin3,

Yes its the Draytek supplied splitter.

I changed the setting in the CLI and that's working now.

I have a separate question about CLI but I'll check the forum for an answer to that and maybe post again

Thanks

Ken

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami