DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IPPBX FXS port wiring

  • d3matt
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 May 2011 15:51 #67767 by d3matt
IPPBX FXS port wiring was created by d3matt
What's the pinout of the RJ11 connectors on the FXS analogue ports?
I assume the pot phone (pins 2 & 5) connect to the middle pins on the RJ11.

Also, what phone socket should the analogue extensions have - 3A secondary or 2A PBX master? I assume, PBX master.

Can anyone confirm?

Please Log in or Create an account to join the conversation.

More
15 May 2011 21:24 #67770 by admin
Replied by admin on topic Re: IPPBX FXS port wiring
Yes, centre two pins of the RJ111, and yes, PBX master.



Forum Administrator

Please Log in or Create an account to join the conversation.

  • d3matt
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 May 2011 21:43 #67772 by d3matt
Replied by d3matt on topic Re: IPPBX FXS port wiring
Thank you very much.

Please Log in or Create an account to join the conversation.

More
13 Jul 2012 17:38 #72924 by ukengb
Replied by ukengb on topic Re: IPPBX FXS port wiring
This topic was most helpful in enabling me to make a lead to connect my phone into the FXS (phone) socket of the Vigor. It works, but doesn't ring on incoming calls. Would I be correct in thinking it needs to be 'connected through' a Master socket in order for the connected phone to actually ring?

Is there no other way to enable this without having to introduce such additional hardware? All I want is to be able to plug a phone into that port and for it to work and ring when called. Is that really too much to ask?

Please Log in or Create an account to join the conversation.

More
13 Jul 2012 19:57 #72927 by admin
Replied by admin on topic Re: IPPBX FXS port wiring
The unit comes with RJ11-BT adaptors, which are 'masters' so will ring phones. If you wish to wire in your own wiring then you need to use a master socket.



Forum Administrator

Please Log in or Create an account to join the conversation.

More
14 Jul 2012 08:19 #72932 by ukengb
Replied by ukengb on topic Re: IPPBX FXS port wiring

admin wrote: The unit comes with RJ11-BT adaptors, which are 'masters' so will ring phones. If you wish to wire in your own wiring then you need to use a master socket.



Hmmm, can't find the adapters. I thought it might have included them, but looks like someone's had them away:-(

I have suitable sockets, but in this instance an in-line adapter would be better. Readily available though so I'll get hold of one from somewhere.

Thanks for the confirmation.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami