DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VigorPhone 350 Expire time

More
03 Mar 2011 11:42 #66610 by haywardi
Replied by haywardi on topic Re: VigorPhone 350 Expire time
Just contacted support.

They know of this problem and advise that it has been fixed in the 350 06c firmware version.

They promised they would send it to me, will confirm once loaded.

Iain

Iain

Please Log in or Create an account to join the conversation.

More
03 Mar 2011 20:05 #66619 by haywardi
Replied by haywardi on topic Re: VigorPhone 350 Expire time
Hi Lee,

An update. I was sent a copy of 6f which I duly installed.

Initial results suggested 6f was suffering from the same problem you described, in that it would register, deregister and not register again. And just like you the hand set says its still connected.....

However, in frustration i upped the expire time from the default 60 seconds to the max of 3600. Curiously it now seems to stay connected! Can't explain it, not sure it will stay that way, but it has stayed that way for the last two hours.

Iain

Iain

Please Log in or Create an account to join the conversation.

More
04 Mar 2011 20:47 #66637 by haywardi
Replied by haywardi on topic Re: VigorPhone 350 Expire time
And it's now stayed connected for the last day, so maybe fixed???????
Iain

Iain

Please Log in or Create an account to join the conversation.

More
18 Mar 2011 15:02 #66866 by asimm.it
Replied by asimm.it on topic Re: VigorPhone 350 Expire time
hi Iain,

Cheers for the update! I'll contact support for this firmware.

Many thanks

Please Log in or Create an account to join the conversation.

More
06 Apr 2011 22:49 #67159 by d3matt
Replied by d3matt on topic Re: VigorPhone 350 Expire time
I'm only a couple of days in on running my IPPBX2820 and I too noticed that calls were going to voicemail without ringing the handset. I wasn't in front of the handset at the time, so couldn't check if it was online and when I did realise the error (when receiving the voicemail), the phone was registered ok.
I thought it was this SIP expiry time but after playing around with it and now leaving it to "60" it is working ok now and not replicated the problem. I don't know why because nothing has changed, apart from set the figure to higher, then back to lower again.

Please Log in or Create an account to join the conversation.

More
06 Apr 2011 23:15 #67160 by haywardi
Replied by haywardi on topic Re: VigorPhone 350 Expire time
Hi Matt,

Good observation, never tried putting it back down to 60 seconds after setting higher to see if it worked!
However I know by leaving I higher it works consistently.

For me consistent reliability is absolute king in this market and despite the apparent price/functionality offered at the headline level draytek haven't delivered where it counts hence I now buy 3cx for my pbx and asstra for phones

I'm sure they'll get it right at some point, but they've lost a customer in me.

Iain
Ps: it's not all doom and gloom and I still buy & install their routers :-)

Iain

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami