DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n+ 2820

  • topspeed007
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Oct 2010 12:40 #64429 by topspeed007
2820n+ 2820 was created by topspeed007
Hi All
I have 1 vigor router (2820) at each of 2 local offices (named Sussex and Kent). At one office (Sussex) we have a Mitel phone system installed and i would like to add an IP phone (mitel 5312) to the Kent office. I understand that i can do this with a VPN, the mitel system is setup for the ip phone already. can somebody help me with the setup please. I know both my WANs and all Network configuration etc (sussex lan is 192.168.1.x and Kent is 192.168.2.x). What I'm struggling with is on the VPN, do i set up 2 vpns - 1 from Sussex - Kent and 1 from Kent - Sussex or do I use just 1 VPN from either office (connected 24/7) and how do i then connect the phone (IP is 192.168.2.201) to this VPN? Sorry to sound like a muppet but i have checked online and nothing has a walkthrough.

Please Log in or Create an account to join the conversation.

More
25 Oct 2010 13:54 #64436 by lozstlouis
Replied by lozstlouis on topic 2820n+ 2820
There are various help article in the Draytek.co.uk website to assist with this. But a rough overview is to ensure you have static IP issued by your ISP. Then setup an IPsec 3DES profile at each site. One should be a "dial out" & the other should be a "dial in". Once all that has been setup the link should come up. Then you can pass whatever traffic you need up & down the pipe. Have a loo at:

http://www.draytek.co.uk/support/vpn_setup.html

www.alits.co.uk

Please Log in or Create an account to join the conversation.

  • topspeed007
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Oct 2010 14:29 #64438 by topspeed007
Replied by topspeed007 on topic 2820n+ 2820
thanks for your reply. how do i set the ip of the phone as 192.168.2.201 - do i do that on the vpn setup ?

Please Log in or Create an account to join the conversation.

More
25 Oct 2010 15:36 #64439 by lozstlouis
Replied by lozstlouis on topic 2820n+ 2820
Either as a DHCP reservation or a static address in the phone itself. You may need to allow a connection from remote subnet on the Mitel.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami