DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820VSn Filtering all SIP Traffic

More
26 Oct 2010 12:29 #64492 by bradley porter
Replied by bradley porter on topic Vigor 2820VSn Filtering all SIP Traffic
Is there any phone device configured to already use 5060?

I am pretty sure that the Draytek would not block 5060 or any PORT.

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

  • sebby
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Oct 2010 12:38 #64493 by sebby
Replied by sebby on topic Vigor 2820VSn Filtering all SIP Traffic
Nope, definitely nothing else using 5060.

Please Log in or Create an account to join the conversation.

More
28 Feb 2011 00:47 #66506 by zedexnz
Replied by zedexnz on topic Re: Vigor 2820VSn Filtering all SIP Traffic
I am having the same/similar issue. YOU cant do a Telnet to the port since 5060 is UDP not TCP. But i did try nmap and the port is definatly open, but no phones from the outside of the WAN can register to the internal IPPBX.

Please Log in or Create an account to join the conversation.

More
01 Mar 2011 23:32 #66573 by asimm.it
Replied by asimm.it on topic Re: Vigor 2820VSn Filtering all SIP Traffic
As this router is a V model, it has built in VOIP and so by default the router is programmed to flow all VOIP traffic to the actual router itself.

Trying to bypass this feature to forward the port to a different server will result in the issue you are experiencing as whilst VOIP is enabled on the router, the router will not forward the traffic to another destination.

You must first disable VoIP on the router and this should cure the issue!

Hope that help!

Please Log in or Create an account to join the conversation.

More
02 Mar 2011 20:17 #66599 by macavity
Replied by macavity on topic Re: Vigor 2820VSn Filtering all SIP Traffic
The Vigor2820Vsn has a port mirror facility that would could use to see if the traffic is being forwarded to the pbx.

It's set via telnet. Te command is

>port sniff ?

Set the txtx port to be the port that connects to you phone system and then connect a PC to another port P4 for example and set p4 as the mirror port. Then run wireshark on that PC. Note, the mirror port is cut off from the network.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami