DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820vn How to transfer inbound PSTN calls between handsets?

  • alexwren
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Sep 2010 12:08 #63746 by alexwren
I have a 2820vn and can't work out how to transfer inbound PSTN calls between handsets?

Someone said that you do recall and then the ext number followed by #

Does that mean that it should be R 2 # or R 02 #? tried both and it wont work. Running latest version of firmware.

Any ideas?

Please Log in or Create an account to join the conversation.

  • alexwren
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Sep 2010 15:57 #63748 by alexwren
I found this info

Can I call between the two ports?

Yes, if your router has two VoIP phone ports (e.g. Vigor2820Vn) you can make a call from one phone to the other locally - this is sometimes known as an 'intercom' facility. Lift the handset and dial 10# or 20# for the appropriate port. Do not set any dial-plan entries which conflict with these codes.

On older VoIP models dial 01 or 02 for the appropriate port



but this also does not work on my set-up

Please Log in or Create an account to join the conversation.

More
11 Sep 2010 22:07 #63753 by admin
I don't think you can transfer a call between the ports.



Forum Administrator

Please Log in or Create an account to join the conversation.

  • alexwren
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Sep 2010 09:17 #63756 by alexwren

admin wrote: I don't think you can transfer a call between the ports.



The funny thing is I used to do this but with an older version of the firmware. I can only think that something has changed or it is now not possible.

Alex

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami