DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820VN No SIP register

More
04 Nov 2009 01:06 #58636 by simonbrighton
Replied by simonbrighton on topic 2820VN No SIP register

plandregan wrote: SIP Port 5060
Register Via WAN1
Domain/Realm 217.10.79.23
Proxy 217.10.79.23
Display Name - MY FULL PHONE NUMBER
The rest is your account details

I have it set for 10 min expiry.



Incoming calls won't work for me with those details unfortunately. I've had to put it back to sipgate.co.uk

I also noticed that my DND after 9pm isn't working now... If only I could find the old firmware and go back a step. Is that availalble anywhere?

Please Log in or Create an account to join the conversation.

  • plandregan
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
04 Nov 2009 07:44 #58637 by plandregan
Replied by plandregan on topic 2820VN No SIP register
Of course.

ftp://ftp.draytek.com/Vigor2820/Firmware/

You can get any previous one you like

Please Log in or Create an account to join the conversation.

More
25 Nov 2009 17:19 #59022 by simonbrighton
Replied by simonbrighton on topic 2820VN No SIP register

plandregan wrote: Of course.

ftp://ftp.draytek.com/Vigor2820/Firmware/

You can get any previous one you like



Just an update for anyone else with this problem: I went back to the previous firmware - version 3.3.1.2_211011 and everything has been fine since.

My 2820VN has been up for 455 hours, and the ADSL has been up for 41 hours. It has clearly had several re-synchs in the time that its been up but the phones are all still registered and have been working fine.

As far as I can see from my testing the problem seems to be exclusive to the latest firmware.

Simon

Please Log in or Create an account to join the conversation.

More
25 Nov 2009 23:27 #59032 by macavity
Replied by macavity on topic 2820VN No SIP register
Simon,

I know this may be a stupid question but . . . have you tried 3.3.3?

Your prevous post was on the 4th and that may have been before 3.3.3 came out.

Please Log in or Create an account to join the conversation.

More
25 Nov 2009 23:59 #59034 by simonbrighton
Replied by simonbrighton on topic 2820VN No SIP register

Macavity wrote: Simon,

I know this may be a stupid question but . . . have you tried 3.3.3?

Your prevous post was on the 4th and that may have been before 3.3.3 came out.



Hmm...looking back at my post dates and the fact that 3.3.3 was released 5/11/09 I guess I tried 3.3.2 before.

The release notes for 3.3.3 include quite a lot about VoIP so perhaps it is worth a stab... Thanks for the heads up Macavity!

For VoIP
�� Corrected: ringing tone for Singapore.
�� Corrected: VOIP regional malfunctions after SAS has been generated.
�� Corrected: SIP memory leakage.
�� Improved: digitmap feature (both WebUI fool-proof check and wildcard support).
�� Corrected: a semi-attendent CT.
�� Corrected: CPU 1.4 VOIP compatibility.
�� Corrected: Doubled VoIP buffer (we reduced it to half in an earlier version) as we found it
is more stable.
�� Fixed: call scenario fails with no registration.
�� Fixed: phone does not ring after calling for a while.
�� Fixed: When RFC-2833 with payload type= 96 packet is received, the router will reboot.
�� Fixed: call forward when busy for S0.
�� Don't let ISDN loop through to PSTN via Digit Map.
�� Increase compatibility with more stun servers.
�� Allowed VoIP number starting with # for non-IP calls.

Please Log in or Create an account to join the conversation.

More
05 Dec 2009 15:44 #59208 by simonbrighton
Replied by simonbrighton on topic 3.3.3 failed! Back to 3.3.12 for me!
3.3.3 failed! I found all my phones unregistered this morning.

Back to 3.3.12 for me!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami