DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VOIP with 2800s - Getting Started

  • skeetman
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Sep 2009 08:33 #57606 by skeetman
VOIP with 2800s - Getting Started was created by skeetman
I have a client with 2 sites and a 2800VG running fw 2.8.2 at each one. They would like to try out VOIP between the 2 sites.

Where do we start? Have heard about SIP and VOIP phones, but cannot find information in a simple step 1, 2, 3 etc description.

Can anyone point me to such a document?
Thanks.

Please Log in or Create an account to join the conversation.

More
09 Sep 2009 17:10 #57650 by admin
Replied by admin on topic VOIP with 2800s - Getting Started
Someone can probably be more comprehensive but firstly go and open a pair of DrayTEL accounts (free!) at www.draytel.org

Then follow their instructions to set up the Vigor2800VG

Plug a regular telephone into each of the routers.

You can then call between them by dialling the other's DrayTEL ID, which I think always starts with an 8 (e.g. 899999#)

You can also dial their IP address directly, but that is not as friendly.

Also see section iV here:
http://www.draytek.co.uk/support/router_faq.html



Forum Administrator

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami