DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

PSTN relay timing issue on 2820Vn

More
01 Nov 2010 15:19 #64601 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
I have a similar Issue. If I dial #0 I get PSTN dial tone for about 5 secs, then it clicks ad reverts back to Voip Dial tone. I cannot place any call or receive any call via PSTN

Please Log in or Create an account to join the conversation.

More
01 Nov 2010 16:27 #64605 by admin
Replied by admin on topic PSTN relay timing issue on 2820Vn
Have you tried adjusting the gain ?

Forum Administrator

Please Log in or Create an account to join the conversation.

More
01 Nov 2010 16:54 #64609 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
Yes I have tried both ear and mic gain. There currently set to 6/6 for both Phone 1 and 2.

Please Log in or Create an account to join the conversation.

More
02 Nov 2010 07:28 #64615 by admin
Replied by admin on topic PSTN relay timing issue on 2820Vn
Is it a very long line; maybe try removing extensiuon plate from NT£4 socket and plugging directly into master for experimentation.

Forum Administrator

Please Log in or Create an account to join the conversation.

More
02 Nov 2010 09:04 #64617 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
Tried that.even tried putting the un filtered cable in to the line in socket. No difference. Is there a setting to ignore a dial tone check, if it even checks

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami