DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Multi NAT problem

  • ziggobar
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Dec 2019 22:13 #95311 by ziggobar
Multi NAT problem was created by ziggobar
I have a Vigor 2862 router with FTTC on WAN1 with 8 IP addresses. It is all setup and working and I have added the other IP addresses in the appropriate place in the Internet Access settings. I have DMZ the second IP address to an RDS server and ports 25 and 443 are forwarded from the router WAN ip address to a mail server offering OWA on 443. All went well until I tried to log onto OWA which worked and then onto RDS which didn't. Long afternoon later I found that if I turned off the 443 forward to the mail server the RDS works. If I re-enable the 443 forward to the mail server RDS gets sent to the mail server IIS not the RDS IIS, which are different. So I can't have 2 https sessions coming into the router on different IP addresses at the same time. Has anyone come across this and solved it?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami