Good evening everyone.

Been using my Draytek 130 in bridge modem for few years now on my ADSL2+ 24mbits line without any issues.Recently i upgraded to 100mbits VDSL2 and my Draytek keeps loosing sync every 5-6 hours sometimes even every 3-4 hours.I put on my ISPs router and its working solid no disconnections or anything even after days.
I tried all different modem codes from the website so far with no luck.

Any ideas?

Maybe you need some different settings, who is your ISP?

AdrianH54 wrote:
Maybe you need some different settings, who is your ISP?

My ISP is Nova using Cosmote cabinets.
Im not from UK.Thought to ask here just in case anyone else had any same issues and solved it by changing something in modem configuration or any other idea i could use

Open the modem GUI > Web Console

Type " vdsl status "

then next line "vdsl status more " [both without quote marks]

Copy paste the output here so we can see your line stats.

AdrianH54 wrote:
Open the modem GUI > Web Console

Type " vdsl status "

then next line "vdsl status more " [both without quote marks]

Copy paste the output here so we can see your line stats.

> vdsl status

---

ATU-R Info (hw: annex A, f/w: annex A/B/C)

---

Running Mode : 17A State : SHOWTIME
DS Actual Rate :100000000 bps US Actual Rate : 9997000 bps
DS Attainable Rate :101506024 bps US Attainable Rate : 47518000 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 392 US Interleave Depth : 9
NE Current Attenuation : 9 dB Cur SNR Margin : 9 dB
DS actual PSD : 9. 3 dB US actual PSD : 11. 2 dB
NE CRC Count : 0 FE CRC Count : 130
NE ES Count : 0 FE ES Count : 105
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-09-0F-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE

---

ATU-C Info

---

Far Current Attenuation : 8 dB Far SNR Margin : 34 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434db1a6
DSLAM CHIPSET VENDOR : < BDCM >


Type ? for command help
> vdsl status more

---

ATU-R Info (hw: annex A, f/w: annex A/B/C)

---

Near End Far End Note
Trellis : 1 1
Bitswap : 0 0
ReTxEnable : 0 0
VirtualNoise : 0 0
20BitSupport : 0 0
LatencyPath : 0 0
LOS : 0 0
LOF : 0 0
LPR : 0 0
LOM : 4 0
SosSuccess : 0 0
NCD : 0 0
LCD : 0 0
FECS : 0 6730 (seconds)
ES : 0 105 (seconds)
SES : 0 82 (seconds)
LOSS : 0 82 (seconds)
UAS : 93 24107 (seconds)
HECError : 0 0
CRC : 0 130
RsCorrection : 0 0
INP : 0 0 (symbols)
InterleaveDelay : 0 700 (1/100 ms)
NFEC : 34 249
RFEC : 2 16
LSYMB : 2675 26860
INTLVBLOCK : 34 249
AELEM : 0 ----
>


Using 3.8.4_modem_8 firmware right now.

Thank you for helping.

You have interleaving on both streams up/down and some of the other values look a bit odd.

I would try the 2 firmwares ( BT and also the Alternative) available here :

https://www.draytek.co.uk/support/downloads/vigor-130

Other than that ask support using this form :

https://www.draytek.co.uk/support/techquery