DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2862 and Nord VPN Config issues.

  • markvk42
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 Jul 2021 18:36 #99627 by markvk42
Replied by markvk42 on topic Re: 2862 and Nord VPN Config issues.
hi, thanks for that, im not exactly sure how to do that but im certain that google will help, its strange that draytek didnt say this when they checked the status, in fact they checked that there weren't any route policies active!

Please Log in or Create an account to join the conversation.

More
21 Jul 2021 20:00 #99628 by pharcyder
Replied by pharcyder on topic Re: 2862 and Nord VPN Config issues.
Without any change in traffic routing, all your traffic will go out the default WAN.

Route Policy is a good place to start. Very straight forward to configure if you have basic networking knowledge in my opinion.

You'll need to decide what traffic you want to route down the VPN tunnel. It could be all traffic from a single device on your LAN or all traffic in a LAN on a particular port. It can be an entire subnet or all traffic for all devices.

Have a read of this to get you acquainted with the UI:

https://www.draytek.com/support/knowledge-base/5013

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami