DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Connected 48V PSU to AP900 by mistake!

More
22 Dec 2020 12:18 #97994 by ollylat
Hi,

I have an AP900 AP and I accidentally plugged it into a 48V PSU. Now I plug the proper 12V one nothing comes on. No lights nothing. Does anyone know what I need to check for like which capacitor etc etc. I am competent with electronics.......but clearly i need some new glasses....

TIA

Olly

Please Log in or Create an account to join the conversation.

More
22 Dec 2020 14:19 #97995 by hornbyp
Replied by hornbyp on topic Re: Connected 48V PSU to AP900 by mistake!
Any obvious Linear Voltage Regulators...



or 'buck' converter ICs in there?



These are points where you can check for 12V 'in' and 5V 'out' (probably!). Of course, what actually happened when 48V was applied was in the lap of the gods - I take it no 'magic smoke' escaped? ... i.e. there's no visible damage?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami