DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Problem with firmware upgrade

  • davidcunningham
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Jan 2013 13:49 #74969 by davidcunningham
Problem with firmware upgrade was created by davidcunningham
I've just joined this forum. I have a Vigor 2820n which is used for a network of computers and also wirelessly. I tried to connect an IPAD 2 to the WiFi yesterday but it would not work. Having done some research I found that it was because of IPV6. So I upgraded the firmware on the router to version 3.3.7.3 but now I cannot access the router as it will not accept my password. What do I need to do as I am about to upgrade broadband to FTTC and will need to change the settings? The router seems to be working OK other than being unable to access it.

Please Log in or Create an account to join the conversation.

More
28 Jan 2013 17:16 #74978 by sicon
Replied by sicon on topic Re: Problem with firmware upgrade
what firmware did you upgrade from?
I think if you were on an early version you need to go to the one before the latest if you were not already on it.

You will probably need to download the firmware upgrade tool and TFTP the firmware back on to the device with the factory defaults and start again

Please Log in or Create an account to join the conversation.

More
30 Jan 2013 00:17 #75011 by babis3g
Replied by babis3g on topic Re: Problem with firmware upgrade
Also check released notes for latest firmware ... is Important
http://www.draytek.co.uk/support/download/readme_v2820.txt

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami