DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Blocking Traffic on 2600 Plus

More
19 Nov 2009 11:40 #58913 by jillp
Blocking Traffic on 2600 Plus was created by jillp
We need to block all email traffic on port 25 unless it is from 1 IP address. I have looked at the manual, but didn't really understand what to do.

Can anyone help.
thanks

Please Log in or Create an account to join the conversation.

More
01 Feb 2010 16:59 #60231 by odyssey
Replied by odyssey on topic Blocking Traffic on 2600 Plus
I cant be 100% as I dont have it in front of me but...
From the router setup, click Firewall, then General. In here you need to enable the data filter. Then under filter setup, choose data then you need to edit a rule set. It is usually 2.

Once in there it goes through the rules in order so you need to allow port 25 from one ip address and then create a rule after to block port 25 from the rest of the subnet.

Im sure I could go into more detail if needed but hopefully this will point you in the correct direction

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami