DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2820n not starting after update

  • brandinimp
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Nov 2009 01:08 #58835 by brandinimp
Draytek 2820n not starting after update was created by brandinimp
Hey all,

Right, so i have had my Vigor 2820n for about a year now, and its been fine, ive updated the firmware no problem.

Today i updated the firmware from 3.3.2 to 3.3.3, i used the web interface to perform the update, and the web interface said the upload was successful and it prompted me to reboot the router, upon rebooting, the router's lights would flash, the activity lights for the connected ethernet sockets flashed somewhat, but not to their usual amount for the traffic that should be passing through, and after about 35 seconds the router would flicker and reboot again.

During the time that the router was somewhat on, no connected devices are able to obtain and IP or effectively communicate with the router.

Any advice?

Please Log in or Create an account to join the conversation.

More
15 Nov 2009 18:33 #58842 by macavity
Replied by macavity on topic Draytek 2820n not starting after update
As it happens there is a similar post with some sugestions on http://www.draytek.co.uk/forum/viewtopic.php?t=13502

Also, check the FAQ as it has instructions on how to recover a unit that is in an abnormal state.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami