Expired

Vigor 2860 Series ADSL/VDSL Router

Expired

Supports VDSL2, ADSL, 3G/4G and Ethernet-based Broadband
BT SIN 498 MCT Approved - New!
3-WAN Simultaneous : VDSL/ADSL, Ethernet and 3G/4G (USB)
Vigor 2860Ln version includes built-in 4G/LTE SIM Slot
Wireless Management of compatible DrayTek APs
IPv6 Ready - See below for feature support
Dual-band (2.4/5Ghz) simultaneous wireless (2860ac)
Extended DFS frequency range in 5Ghz band
DrayTek Firewall with huge flexibility
High Availability (Hardware failover) - New!
6-Port Gigabit Ethernet LAN Switch
Temperature Monitoring (optional Thermometer)
Wireless Guest Portal
Multiple Private LAN Subnets
SMS (Text Message) Alert
VLANs (Port, 802.1q & Wireless) - Info
Includes SmartMonitor software
Content Filtering (by keyword, data type or category)
Internal RADIUS Server
LDAP Integration for VPN and user access
QoS (Layer 2&3, 802.1p & TOS/DCSP)
Up to 32 VPN tunnels for LAN-to-LAN or teleworkers
VPN Trunk/Backup to remote sites
SSL VPN - Tunnel or Proxy (16 users)
USB Port for Printer, Logs or 3G Modem
Optional VigorCare Available

Overview

This product is now EOL (discontinued) - Replaced by the Vigor 2862 series

Vigor 2860 Series VDSL/ADSL Router Firewall

The Vigor 2860 series (including the Vigor 2860n and Vigor 2860Vn) is our new router/firewall which can support either ADSL or VDSL (BT Infinity™/FTTC). This makes the Vigor 2860 ideal for users with ADSL now who might upgrade to VDSL later. Alternative WAN ports can insead provide connectivity to Ethenet feeds, secondary xDSL modems or a 3G/4G cellular service using a supported USB adaptor. This latest router series includes support for professional features such as VLAN tagging, Gigabit Ethernet built-in WiFi ('n' and 'ac' models).

Packed with professional-level features, the Vigor 2860 series offers truly comprehensive DSL connectivity and security. Compatible with all UK variants of ADSL (including ADSL2+ and Annex M), VDSL and VDSL2, the Vigor 2860 can also be used for cable-modem, leased line and EFM applications using its Gigabit Ethernet WAN port. You can also add a 3G/4G/LTE cellular modem for wireless WAN connectitivity to supplement your fixed line connection(s) or as your primary connectivity. The Vigor 2860Ln version has the 3G/4G built-in so no extra USB modem is needed.

Vigor 2860 front panel sockets

A 6-port Gigabit Ethernet switch on the LAN side provides high speed connectivity for your server, other local PCs or for uplink to a larger Ethernet switch. Comprehensive security features include content filtering, web application controls and an object based firewall management system.

Runs on either ADSL or VDSL

The Vigor 2860's built in DSL interface will connect to either an ADSL or VDSL line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2860's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided and powered by a cabinet in your street - that's where the line terminates. ADSL service, on the other hand, comes all the way from your local exchange, which coul be miles away and is powered from there. That means that if your street's VDSL cabinet is damaged, its DSLAM fails or you lose power to your street, you lose VDSL, but your ADSL line comes via a different method and route, so it's less likely that both would be affected. These failover methods can also be used instead for the other WAN ports on the router (Ethernet or 3G).

Vigor 2860 connectivity schematic

Robust & Comprehensive Firewall

Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems. The latest ('Version 3') DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2860 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can be selectively applied to specific users within your NAT subnet according to source or destination IP address.

IPv6 - Next Generation Internet Routing

The Vigor 2860 supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2860 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers. To learn all about IPv6, you can get our detailed guide to IPv6 here.

IPv6 on the Vigor 2860 series provides the following features:

Operation on any one of the WAN ports (ADSL/VDSL, Ethernet or 3G)
Connectivity to direct native IPv6 ISPs
Support for IPv6 RIPng
Built-in tunneling to 3rd party IPv6 brokers
supporting TSPC or AICCU methods
Default stateful firewall for all IPv6 LAN Clients/Devices
DHCPv6 Client or Static IPv6 Client
DHCPv6 & RADVD for client configuration
IP Filtering Rules
QoS for IPv6 with DiffServ
Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List
Simultaneous (concurrent) operation with IPv4 ("Dual-Stack")
Other router features are available on IPv4 only currently

IPv6 support DrayTek Vigor 2860

Web Content Filtering

GlobalView Categories

The content control features of the Vigor 2860 allows you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal. Using DrayTek's GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.

WAN Load Balancing & Backup

The Vigor 2860 features three methods of WAN connectivity - ADSL/VDSL, Ethernet (Gigabit, switchable with LAN6) and a USB port for connection of a 3G modem. The Ethernet port can connect to a second ADSL modem (e.g. Vigor 120), a cable modem or any other Ethernet-based Internet feed. The multiple WAN interfaces can be used either for WAN-Backup or load balancing. Load-balancing or failover supports IPv4 only currently.

WAN-Backup provides contingency (redundancy) in case of your primary ADSL line or ISP suffering temporary outage). Internet Traffic will be temporarily routed via the secondary Internet access. When normal services is restored to your primary ADSL line, all traffic is switched back to that.

Vigor 2860 Load Balancing with two DSL lines via additional modem
The Vigor 2860 can connect directly to an ADSL or VDSL line. WAN2 is a Gigabit Ethernet
port and can connect to a secondary modem/connection, such as another DSL modem.

If you don't have VDSL or ADSL, the Ethernet WAN port can instead be used as your primary/only Internet connection (using NAT) so the same router can be used regardless of whether you have xDSL or Ethernet Internet connections currently.

The USB port provides Internet connectivity (main, backup or load balanced) by connecting to a compatible USB modem (or cellphone) for access to the high speed 3G/4G/LTE cellular networks from UK providers such as Vodafone, O2, 3 and EE. If you don't have DSL at all, the USB/3G/4G access method can be used as your primary/only Internet connection, ideal for temporary locations, mobile applications or where broadband access is not available. Alternatively, if you will be making more regular use of 3G/4G/LTE, consider the Vigor 2860Ln model with its built-in cellular modem & SIM slot.

User Management/Authentication

The Vigor 2860 has built-in user management which allows you to provide conditional internet access to different users based on their own unique login (stored in the router, or on an external Radius server). For full details of this feature, click here.

802.1q Tagged, Wireless & Port Based VLAN

The Vigor 2860 features a hugely flexible VLAN system. Each of the six Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated. For a full explanation of VLANs, click here.

Rack Mounting Kit

Vigor 2820 in RM1 Rack mounting bracket

The RM1 Rackmount Bracket enables you to fit any Vigor 2860 series router into a standard 19" rack or cabinet. The bracket takes up one rack slot (1U) and includes a cable retainer at the back to keep the power cord captive. The front mounted sockets of the router remain fully accessible. For wireless models, we then recommend extension aerials (or aerial extensions).

Network Attached Storage (NAS)

USB Memory

The Vigor 2860's USB port can also be used to add storage memory to the unit in the form of a USB memory key (as shown right). The Vigor 2860 then provides FTP access file uploading/downloading which can be from the local LAN or from anywhere on the Internet - ideal for a simple to deploy file depository. Access can be 'public' or using usernames and passwords, each of which can have their own directories and/or file access rights. As well as FTP, file sharing is available as a Windows 'network drive'. You can also use Windows Explorer to view and access the contents of the USB drive.

If you do have a USB memory key connected, you can also have the router save it's system logs (syslog) to that memory instead of to a connecting computer; useful for technical personnel (SysAdmins).

The NAS facility uses any FAT32 formatted device and provides a transfer rate of 12Mb/s.

VPN/SSL

VPN - Linking remote offices, HQ, teleworkers and mobile staff

A feature central to DrayTek routers is the VPN (Virtual Private Networking) features. A VPN enables you to link two remote offices, branch offices back to HQ or home-based/mobile teleworkers back to your office. Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.

The Vigor 2860 allows you to set up up to 32 simultaneous VPN tunnels to remote offices or teleworkers. The Vigor 2860 supports all industry standard protocols, including encryption and authentication methods. Teleworkers can authenticate directly with your LDAP server if preferred.

VPN Schematic

The Vigor 2860 supports VPN trunking; this allows you to create tunnels down muliple WAN connections to a remote site in order to increase bandwidth. VPN trunking also provides failover (backup) of your VPN route down a secondary WAN connection. You can learn more about DrayTek VPN here.

The Vigor 2860 also supports SSL VPN. These are encrypted tunnels linking your teleworker back to your main office but they are 'clientless in that your O/S does not need to generate the tunnel and you do not need to install any VPN software manually. You instigate an SSL tunnel from your regular web browser, so it could be in a web cafe or guest network, and the tunnel is creating using SSL technology - the same encryption that you use for secure web sites such as your bank. The Vigor 2860 can operate SSL VPNs in either Proxy or full tunnel mode and allows up to 16 simultaneous incoming users. For SSL VPN tunnel mode Windows OS, Mac OS X, Apple iOS and Android are supported.

You can learn more about DrayTek SSL VPNs here.

WiFi

Reliable and High-Performance Wireless LAN ('n' and 'ac' models only)

The Vigor 2860 Series 'n' models feature 802.11n wireless LAN specification and has been certified by the WiFi alliance for cross compatibility and WiFi compliance (including WPA/WPA2 and WMM). The Vigor 2860n and Vn models includes a hardware co-processor for WiFi to ensure best performance and encryption processing.

802.11n provides a total wireless bandwidth of up to 200Mb/s using new methods such as packet aggregation and channel bonding. Real-world throughput depends on your own environment (factors such as obstructions, number of hosts and distance all make a significant difference), but actual transfer speeds of over 100Mb/s are achievable (based on our real world tests). In addition, 802.11n provides greater coverage and resilience to interference compared to previous wireless standards thanks to the MIMO technology and the Vigor's antennae diversity arrangement.

Dual-band Wireless (Vigor 2860ac model)

The standard Vigor 2860n supports all 2.4Ghz band channels. The Vigor 2860ac additionally supports simultaneous operation of the new 5Ghz band. The 5Ghz band is far less congested so if your PCs or other devices support the 5Ghz band, you can use that. The Vigor 2860ac operate both bands at the same time, so your devices can use either.

Wireless Security

The Vigor 2860 Series wireless models provides several independent levels of security including encryption (up to WPA2), authentication (802.11x) and methods such as MAC address locking and DHCP fixing to restrict access to authorised users only. The Web interface lets you see how many and which clients are currently connected as well as their current bandwidth usage. An 'instant' block lets you disconnect a wireless user temporarily in case of query. The Wireless VLAN facility allows you to isolate wireless clients from each other or from the 'wired' LAN.

The Vigor 2860 wireless versions also allow guest access with password protection so that visitors can use your WiFi access, but only with a password which you set for them. When the user connects to your wireless LAN, they are firstly presented with your login screen before any Internet access is permitted. This is in addition to any encryption system you have running.

The Multiple SSID features enables you to have up to four distinct or common virtual wireless access points. For example, you could have one for company usage, with access to your company LAN and another for public access which allows internet surfing only. Setting up wireless security is made easier thanks to the WPS feature (WiFi protected setup) whereby your client PC can get it's security keys by pressing a button on the front of the router.

For specialist or more demanding coverage applications, optional aerials can be used with the Vigor 2860 to potentially increase the range of wireless coverage (depending on environment) or provide directional coverage in order that your wireless transmission is focussed and concentrated into one direction only, for example into a room or across open space. With the increasing popularity of wireless LANs, you will want to choose the least congested wireless channel (Nos. 1-13) for yours so the Vigor can scan and provide a list of all devices in the vicinity so that you can choose the best channel (see screenshot below).

The Vigor2860n provides a local survey of other devices so that you can choose the least congested channel.
Above : The Vigor 2860n provides a local survey of other access points
so that you can choose the least congested channel.

802.11n Compliant
802.11a (Vigor 2860n-Plus & 2860ac)
802.11ac (Vigor 2860ac)
Hardware wireless co-processor for increased throughput
'MIMO' Technology with two aerials (2T2R) for diversity
Packet Aggregation and Channel Bonding
Optional Higher Gain or directional aerials available - Click Here.
Backward compatible with 802.11b and 802.11g Standards
Active Client list in Web Interface
Wireless LAN Isolation (from each other and/or wired LAN)
64/128-bit WEP Encryption
WPA/WPA2 Encryption
WPS - WiFi Protected Setup for client security setup
Switchable Hidden SSID
Restricted access list for clients (by MAC address)
Time Scheduling (WLAN can be disabled at certain times of day)
Access Point Discovery
WDS (Wireless Distribution system) for Bridging and Repeating
802.1x Radius Authentication
Wireless Rate-Control
Automatic Power Management
802.11e WMM (Wi-Fi Multimedia)

Wireless LAN WDS Facility

Vigor 2860 'n' models support WDS (Wireless Distribution System) which enables you to use the wireless capability to bridge to another network, within wireless range. You need an additional compatible wireless router for this of course. For further details, see here.

wireless capacity, including RX/TX capacity, protocol overheads and all clients/hosts connected.

VoIP

Voice-over-IP Features ('Vac' Model)

The Vigor 2860Vac model provides two analogue phone ports and an analogue line port provide full PSTN and VoIP integration via both the Internet (VoIP) and your regular analogue line. You can connect 1 or 2 regular telephones and the can be used independently and simultaneously for both incoming and outgoing calls.

As well as the two telephone ports, a third port, the Analogue Line port, connects into your regular analogue line (PSTN/POTS*). This then gives the telephones access to your analogue line to allow you to make calls as well as your VoIP facility (you can select the PSTN line instead of VoIP by dialling #0). Incoming calls are automatically switched through to your telephone(s) (either one or both) so that each phone can be used for both VoIP and POTS calls. Both telephones plugged into your router have access to VoIP and your analogue line. In addition, using the 'Digit-Map' facility you can set rules about particular call destinations using either the POTS line or your SIP/VoIP service. For example, local calls can be routed via your PSTN line (if you have a free calls package for example) whereas international calls can go via your preferred VoIP provider; there is flexibility to have several digit-map rules.

As well as connecting with a SIP/VoIP gateway directly (such as DrayTEL), the Vigor 2860Vac can register its phones as extensions on a remote IP PBX, such as DrayTek's Vigor IPPBX products, so this is an idea teleworker solution.

*POTS = Plain Old Telephone Service - The traditional analogue phone voice line in your home/office, e.g. B.T. That line may also be carrying your ADSL data signal.

VoIP Features ('Vac' model only):
- Two 'FXS' Phone Ports
- Line Port for connection to analogue (POTS) line
- Automatic phone switch-over for incoming calls on either PSTN or VoIP
- Hotline Facility (Dial preset number when handset lifted)
- Digit-Map facility for LCR selection
- Protocols: SIP, RTP / RTCP
- 12 SIP Registrar Accounts (for up to 12 VoIP providers/Trunks)
- Compatible as remote extensions on DrayTek IP PBXs
- G.168 Line Echo-cancellation
- Automatic Gain Control
- Jitter Buffer ( 125ms )
- Voice Codecs:
  - G.711 A / Law
  - G.723.1
  - G.726
  - G.729 A / B
- VAD / CNG
- Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
- DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
- FAX / Modem Support G.711 Pass-through
- T.38 for FAX
- Supplemental Services (Dependent on ITSP):
  - Caller ID
  - Call Hold / Retrieve
  - Call Waiting
  - Call Waiting with Caller ID
  - Call Transfer
  - Call Forwarding ( Always , On Busy and On No Answer )
  - DND (Do not Disturb)
  - Call Barring ( Incoming / Outgoing )
  - MWI ( Message Waiting Indicator ) ( RFC-3842 )

Specification

Vigor 2860 ADSL/VDSL Series - Technical Specification (UK Hardware Spec.)

Physical Interfaces:
- LAN Ports (Switch)
  - 6 X Gigabit Ethernet (1000Mb/s) Ports
- WAN Ports:
  - WAN1 : ADSL/VDSL, RJ11
  - WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
  - WAN3 : USB 2.0 Port for 3G/4G Modem or Printer
  - WAN4 : USB 2.0 Port for 3G/4G Modem or Printer
- Phone Ports : 2 x BT Type sockets. FXS type (V2860Vac only)
- Line Port : For POTS/PSTN voice line connection (V2860Vac only)
Performance:
- Firewall: Up to 300Mb/s max
- IPSec VPN: Up to 50Mb/s max
ADSL Compatibility:
- ANSI T1.413 Issue2
- ITU-T G.992.1 G.dmt (ADSL)
- ITU-T G.992.2 G.lite
- ITU-T G.992.3 ADSL2
- ITU-T G.992.5 ADSL2+
- Annex L (READSL)
- Annex A
- Annex M
- ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
- DSL Forum : TR-048/67 & TR-100
VDSL Compatibility:
- BT Infinity Option 1 & Option 2 Compatible
- BT SIN 498 MCT Approved
- Support for G.INP & Vectoring
- ITU-T VDSL2 G.993.2
- ITU-T G.993.1, G.997.1
- Band Plan: G.998, G.997
- Annex A, Annex B, Annex C
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
- OLR, UPBO, DPBO Supported
- US0 Supported
- Loop Diagnostic Mode
- DSL Forum WT-114
Load Balance/Failover Features:
- Outbound Policy-Based Load-Balance to direct traffic via:
  - NAT or Routing
  - WAN Interface
  - LAN Interface
  - Specific LAN Gateway
  - VPN Tunnel
- IP-Based or Session-Based Load Balance modes NEW!
- WAN Connection Fail-over
- BoD (Bandwidth on Demand)
- WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
- Configurable Load-Balance pool, specify WAN interfaces to load balance
- WAN Budget
Vigor 2860 ATM Protocols (DSL):
- RFC-2684/RFC-1483 Multiple Protocol over AAL5
- RFC-2516 PPP over Ethernet
- RFC-2364 PPP over AAL5
- PPPoE pass through LAN/WLAN
- PPPoE/PPPoA Relay
- Transparent bridge for MPoA
- Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
- Support for RFC4638 for MTU up to 1500
Wireless LAN Features ('n' 'n-plus' and 'ac' Models Only):
- 802.11n Compatible with backward support for 802.11b/g
- 802.11a ( Vigor 2860n-plus & 2860ac only)
- 802.11ac (Vigor 2860ac only)
- Simultaneous Dual Band (2.4Ghz/5Ghz) (Vigor 2860n-plus & 2860ac only)
- Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
- Packet Aggregation and Channel Bonding
- Optional Higher Gain or directional aerials available - Click Here.
- Active Client list in Web Interface
- Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
- 64/128-bit WEP Encryption
- WPA/WPA2 Encryption
- Switchable Hidden SSID
- Restricted access list for clients (by MAC address)
- Time Scheduling (WLAN radio can be disabled at certain times of day)
- Time Scheduling for individual SSIDs NEW!
- Access Point Discovery
- WDS (Wireless Distribution system) for WLAN Bridging and Repeating
- 802.1x Radius Authentication
- Wireless VLAN
- Wireless Rate-Control
- Automatic Power Management
- 802.11e WMM (Wi-Fi Multimedia)
- Station Control, limit wireless client access time per day
- Airtime Fairness NEW!
- Band Steering NEW!
- Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
VoIP Features (Vigor 2860Vac only):
- Protocols: SIP, RTP / RTCP
- 12 SIP Registrar Accounts (for up to 12 VoIP providers)
- Line port for PSTN Passthrough (integrates POTS line)
- Auto-fallback to PSTN under power/Internet failure
- G.168 Line Echo-cancellation
- Automatic Gain Control
- Jitter Buffer ( 125ms )
- Voice Codecs:
  - G.711 A / Law
  - G.723.1
  - G.726
  - G.729 A / B
  - VAD / CNG
- Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
- DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
- FAX / Modem Support G.711 Pass-through
- T.38 for FAX
- Supplemental Services:
  - Caller ID
  - Call Hold / Retrieve
  - Call Waiting
  - Call Waiting with Caller ID
  - Call Transfer
  - Call Forwarding ( Always , On Busy and On No Answer )
  - DND (Do not Disturb)
  - Call Barring ( Incoming / Outgoing )
  - MWI ( Message Waiting Indicator ) ( RFC-3842 )
  - Hotline (Dial preset number when handset lifted)
WAN Protocols (Ethernet):
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
Firewall & Security Features:
- CSM (Content Security Management):
  - URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
  - Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
  - Prevent accessing of web sites by using their direct IP address (thus URLs only)
  - Blocking automatic download of Java applets and ActiveX controls
  - Blocking of web site cookies
  - Block http downloads of file types :
    - Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
    - Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
    - Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
  - Time Schedules for enabling/disabling the restrictions
  - Block popular P2P (Peer-to-Peer) file sharing programs
  - Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
- DNS Filter: Use DNS to enforce categorisation
- Web Portal
- Multi-NAT (32 WAN IPs per WAN1 & WAN2)
- DMZ Host
- DMZ Port (via LAN port P1, switchable)
- 40 Port Redirection rules
- 40 Open Port rules (10 port ranges per rule)
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
- User Management:
  - Up to 200 Profiles
  - Supports external authentication via LDAP or RADIUS
  - Per User Bandwidth and Time Quota
  - Schedule Control to delete or disable account automatically
Bandwidth Management:
- Quality of Service (QoS - For devices in the NAT subnet according to source or destination IP)
  - Guaranteed Bandwidth for VoIP
  - Class-based Bandwidth Guarantee by User-Defined Traffic Categories
  - Layer 2&3 (802.1p & TOS/DCSP)
  - DiffServ Code Point Classifying
  - 4-level Priority for each Direction (Inbound / Outbound)
  - Bandwidth Borrowed
  - App QoS: Classify traffic by Application NEW!
- Temporary (5 minute) Quick Blocking of any LAN Client
- Bandwidth Limit (Shared or individual limit)
- Smart Bandwidth Limitation (Triggered by Traffic / Session)
- Session Limit
Network/Router Management:
- Web-Based User Interface (HTTP / HTTPS)
- CLI ( Command Line Interface ) / Telnet / SSH
- Web Console: Access CLI through Web Interface
- Administration Access Control
- Brute Force Protection NEW!
- Configuration Backup / Restore
- Configuration Import from Vigor 2820, Vigor 2830 & Vigor 2850
- Built-in Diagnostic Function
- Firmware Upgrade via Web Interface, TFTP, FTP
- Logging via Syslog
- Supports SmartMonitor (up to 50 IPs monitored)
- SNMP v3 Management with MIB-II
- TR-069
- TR-104
- Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
- Switch Management: Centrallly Manage up to 10 DrayTek VigorSwitches NEW!
VPN Facilities:
- Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
- Tunnelling Protocols:
  - PPTP
  - IPSec
  - L2TP
  - L2TP over IPSec
  - DrayTek SSL
  - GRE NEW!
- IPSec Main and Agressive modes
- IKE Phase 1 DiffieHelman Groups 1,2,5 & 14
- IKE Phase 2 DiffieHelman Groups 1,2,5 & 14 (will match phase 1 selection)
- Encryption : MPPE, DES / 3DES (168bits) and Hardware-Based AES (128/192/256bits)
- Authentication : Hardware-Based MD5, SHA-1 and SHA-256 (f/w 3.8.3 and later)
- IKE Authentication : Pre-shared Key or X.509 Digital Signature
- SSL VPN for teleworkers - Up to 16 simultaneous users. Proxy or tunnel
- LAN-to-LAN & Teleworker-to-LAN connectivity
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection (DPD)
- VPN Pass-Through
- MOTP (Mobile One Time Password) for two factor authentication (2FA)
- Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
- Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN NEW!
Network Features:
- Port-Based VLAN (Inclusive/Exclusive Groups)
- 802.1q VLAN Tagging
- Port Mirroring
- 802.1X Port Authentication
- Multi Subnet DHCP Servers with DHCP Relay
- Custom DHCP Option support
- Dynamic DNS
- DNSSEC support NEW!
- DNS Transparent Proxy
- DNS Caching
- LAN DNS (supports CNAME)
- NTP Client (Synchronise Router Time)
- Call Scheduling (Enable/Trigger Internet Access by Time)
- RADIUS Client
- LDAP Client
- TACACS+ Client
- High Availability NEW!
- Internal RADIUS Server NEW!
- Microsoft™ UPnP Support
- Maximum MTU 1534
- Routing Protocols:
  - Static Routing (30 routes)
  - RIP V2
  - RIPng for IPv6 NEW!
Operating Requirements:
- Rack Mountable (Optional Vigor RM1 mounting bracket required)
- Wall Mountable
- Temperature Operating : 0 °C ~ 45 °C
- Storage : -25 °C ~ 70 °C
- Humidity 10% ~ 90% (non-condensing)
- Power Consumption: 18 Watt Max.
- Dimensions: L240.96 * W165.07 * H43.96 ( mm )
- Operating Power: DC 12V (via external PSU, supplied)
- Warranty : Two (2) Years RTB
- Power Requirements : 220-240VAC

Screenshots

New Vigor 2860 Dashboard in Web Interface

Vigor 2860 WUI Dashboard

Logging of Ambient Temperature (Requires optional thermometer)

Temperature on Vigor 2860 Chart

Web Content Filtering

Web Content Filtering Surf Control CSM Profile

Diagnostic Tools

Graph Ping Trace route

Wireless LAN Access Point Scanning

The Vigor2860n provides a local survey of other devices so that you can choose the least congested channel.

Vigor 130 WAN information

The Vigor2860n provides a local survey of other devices so that you can choose the least congested channel.

WAN2 on the Vigor 2860 is an Ethernet port to which you can connect any Ethernet Internet feed. This can also be used to connect DrayTek's Vigor 130 DSL model in order to connect a second ADSL or VDSL line to the Vigor 130. When the Vigor 2860 is used with the Vigor 130, the Vigor 2860 can report the DSL line statistics from the Vigor 130 in its own web interface (above) alongside the built-in DSL interface.

Product Codes

Vigor 2860 Series Product Codes

The Vigor 2860 Series comes in several different models depending on the wireless or VoIP support /features required. Please double check when ordering that you have selected the correct product and a product intended for the correct region/network.

The EAN is a barcode number which identifies the unique specific product type. It is separate to the product serial number which is unique to each product. The EAN will also appear on your product box when you receive it so you can double check that you have been sent the right product.

These product codes are for UK/Irish products only. Please check with your local DrayTek office for the correct part nos. for your region if you are not in the UK/IE to ensure that you get the correct hardware and local support/warranty.

Product Code	EAN	Product Description	Notes
V2860-K	4716779074185	Vigor 2860 (UK Version)
V2860N-K	4716779074680	Vigor 2860n (UK Version)	802.11n Wireless
V2860NP-K	4716779075380	Vigor 2860n-Plus (UK Version)	802.11n dual-band wireless

V2860AC-K	4716779077988	Vigor 2860ac (UK Version)	802.11ac Wireless
V2860VAC-K	4716779078091	Vigor 2860Vac (UK Version)	VoIP & 802.11ac Wireless
V2860L-K		Vigor 2860L (UK Version)	Built-in 4G/LTE
V2860LN-K		Vigor 2860Ln (UK Version)	Built-in 4G/LTE & WiFi

Share this link

Overview

This product is now EOL (discontinued) - Replaced by the Vigor 2862 series

Vigor 2860 Series VDSL/ADSL Router Firewall

Runs on either ADSL or VDSL

Robust & Comprehensive Firewall

IPv6 - Next Generation Internet Routing

Web Content Filtering

WAN Load Balancing & Backup

User Management/Authentication

802.1q Tagged, Wireless & Port Based VLAN

Rack Mounting Kit

Network Attached Storage (NAS)