DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2700 "Remote Dial-in User" option missing

More
09 May 2011 10:58 #67648 by ricko
I have a Vigor 2700 running the latest firmware (2.8.2_131701) and I want to set-up a dial-in VPN user.

The Vigor 2700 Series User Guide shows this being done via the 'Remote Dial-in User' page (under 'VPN & Remote Access') but that option is missing. Do I have to do something to activate this feature?

Please Log in or Create an account to join the conversation.

More
09 May 2011 11:29 #67650 by ricko
Additional info:

I found later firmware (2.8.3) on the Dratek International FTP site and have installed it, but the option still does not appear.

Please Log in or Create an account to join the conversation.

More
09 May 2011 13:33 #67655 by admin
The feature is not supported on that model. It's only dial-out VPN



Forum Administrator

Please Log in or Create an account to join the conversation.

More
09 May 2011 14:22 #67657 by ricko
How bizarre. The feature is comprehensively documented, even in the latest version of the user guide. I can't imagine why Draytek would have included the teleworker dial-in feature in the 2600, 2800 and 2900 series routers but not in the 2700, particularly since (like all the others) it still supports LAN-to-LAN VPN.

Please Log in or Create an account to join the conversation.

More
11 May 2011 10:39 #67691 by voodle
That's because it, like the 2500, 2710, 2100 and 2110 are meant for home use or use as remote sites - it's the 2600, 2800 & 2820, 29xx that have the full dialin & out features.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami