DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2927ax poor performance with f/w 4.4.0

  • craigski
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
30 Apr 2022 18:39 #101080 by craigski
2927ax poor performance with f/w 4.4.0 was created by craigski
Just upgraded a 2927ax with the recent 4.4.0 firmware from draytek.com, did multiple speedtests only getting ~500Mbs.

Noticed CPU maxed to 80-90% on Draytek dashboard.

Rolled back to 4.3.2, speedtests back to normal, 900Mbs, CPU running at 1% during speedtest.

Hardware acceleration was turned on for NAT, same config on both tests.

Issue with 4.4.0, maybe specific to ax model?

I'll stay with 4.3.2 for moment.

Please Log in or Create an account to join the conversation.

More
01 May 2022 03:45 #101081 by kelfaur
Replied by kelfaur on topic Re: 2927ax poor performance with f/w 4.4.0
I'm running 2927Lac with v4.4.0 on gig virgin connection, still getting ~900mbps.

Please Log in or Create an account to join the conversation.

  • craigski
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
01 May 2022 14:37 #101082 by craigski
Replied by craigski on topic Re: 2927ax poor performance with f/w 4.4.0
The ax vs ac is different hardware inside, as ax has limited features vs ac models.

Previously with 4.3.2 f/w there was two different versions, one for all models of 2927 except ax, and a specific 4.3.2 for ax:

https://draytek.co.uk/support/downloads/vigor-2927ax/send/1031-vigor-2927ax/2478-readme-v2927ax-432


I'm only seeing one version of 4.4.0 now, maybe a specific version ax will appear soon?

https://www.draytek.com.tw/ftp/Vigor2927/Firmware/v4.4.0/DrayTek_Vigor2927_V4.4.0_release-note.pdf

Please Log in or Create an account to join the conversation.

More
02 May 2022 00:16 #101083 by edinburgh
Replied by edinburgh on topic Re: 2927ax poor performance with f/w 4.4.0

craigski wrote:
The ax vs ac is different hardware inside, as ax has limited features vs ac models.

Previously with 4.3.2 f/w there was two different versions, one for all models of 2927 except ax, and a specific 4.3.2 for ax:

https://draytek.co.uk/support/downloads/vigor-2927ax/send/1031-vigor-2927ax/2478-readme-v2927ax-432


I'm only seeing one version of 4.4.0 now, maybe a specific version ax will appear soon?

https://www.draytek.com.tw/ftp/Vigor2927/Firmware/v4.4.0/DrayTek_Vigor2927_V4.4.0_release-note.pdf



That's such an informative post!

Please Log in or Create an account to join the conversation.

More
03 May 2022 15:09 #101087 by iantoal
Replied by iantoal on topic Re: 2927ax poor performance with f/w 4.4.0
I saw this with the early beta 4.4.0 firmware for the 2927ax. I reported it at the time and unfortunately the issue shipped in the final bits.

In my case I only see the cpu spikes when connecting through the LAN ports (via my wired 960 APs or otherwise). If I connect directly to the router WiFi I dont have this issue. If I disable the router WiFi the CPU issue goes away i.e. the client connecting through my wired APs or on my wired LAN are able to access the internet at full speed.

Please Log in or Create an account to join the conversation.

  • craigski
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 May 2022 18:26 #101088 by craigski
Replied by craigski on topic Re: 2927ax poor performance with f/w 4.4.0
Thanks. All tests I performed were using LAN connection with WiFi disabled on the ax.

I get ~900Mbs on 4.3.2, but only 500-600Mbs using 4.4.0 on the ax with WiFi disabled.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami