DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Cant get 2960 to connect to BT Ultrafast

  • bruceread
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Apr 2019 14:35 #94326 by bruceread
Cant get 2960 to connect to BT Ultrafast was created by bruceread
Any ideas?

Please Log in or Create an account to join the conversation.

More
03 Apr 2019 17:28 #94327 by admin
Replied by admin on topic Re: Cant get 2960 to connect to BT Ultrafast
Not enough info.... what happens... how is it connected..what error do you get... Do you mean physically connected or IP ?

Forum Administrator

Please Log in or Create an account to join the conversation.

  • bruceread
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Apr 2019 17:36 #94328 by bruceread
Replied by bruceread on topic Re: Cant get 2960 to connect to BT Ultrafast
Hi,

Sorry!

I think I have configured correctly -

Default MAC Address - Enable
PPPoE
NAT
IPv6 Protocol - Link Local
VLAN Tag - Enable
VLAN ID - 101
Priority(802.1p) - 0

MTU/MRU - 1492
Service Name - Blank
Debug - Disable
Always On - Enable
Fixed IP - Enable
Fixed IP Address - Filled in
Connection Detection Mode - None
IP Alias - Blank
Specify DNS - Disable

Thanks

Bruce

Please Log in or Create an account to join the conversation.

More
03 Apr 2019 22:20 #94329 by admin
Replied by admin on topic Re: Cant get 2960 to connect to BT Ultrafast
You haven't said how it's connected to the line. Presumably there is a BT router too?
It's probably NOT providing a PPPoE service, so you'd have to use DHCP.

Forum Administrator

Please Log in or Create an account to join the conversation.

  • bruceread
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
04 Apr 2019 11:04 #94331 by bruceread
Replied by bruceread on topic Re: Cant get 2960 to connect to BT Ultrafast

admin wrote: You haven't said how it's connected to the line. Presumably there is a BT router too?
It's probably NOT providing a PPPoE service, so you'd have to use DHCP.



It is not using BT router, connected via this -

https://www.ournetwork.openreach.co.uk/resources/site1/General/Downloads/ONT%20Factsheet.pdf

Please Log in or Create an account to join the conversation.

More
04 Apr 2019 12:07 #94332 by anaglypta
Replied by anaglypta on topic Re: Cant get 2960 to connect to BT Ultrafast
Hello Bruce,

VLAN tagging didn't work for me. When I dissabled it everything worked fine.

John.

Please Log in or Create an account to join the conversation.

Moderators: Chris