DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2960 FW: 3.0.7_Beta Cannot create additional LAN interface

  • desc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
12 Feb 2013 15:20 #75166 by desc
I'm now trying to add a new LAN interface on Port4 which will be a seperate VLAN to ports 1 through 3 but the web interface just won't let me add the interface.

The steps I'm trying are (2960 is on 192.168.0.1/24):

LAN -> Switch
VLANID = 10 [ Member's LAN_Port_1, LAN_Port_2, LAN_Port_3] [ Untag LAN_Port_1, LAN_Port_2, LAN_Port_3]
VLANID = 20 [Member's LAN_Port_4] [Untag LAN_Port_4]

LAN -> General Setup -> Add
Profile: HVLAN
Description: BranchLAN
VLAN ID: 20
Priority: 0 (or 1, 2, 3...)
Mode: NAT
IP Address: 192.168.11.1
Subnet Mask: 255.255.255.0/24

Click Apply and nothing happens.

Either I'm missing something obvious or it's another firmware bug ?

Please Log in or Create an account to join the conversation.

More
12 Feb 2013 16:40 #75167 by the pit
No idea I'm more curious as to where you've got the beta software from. It's a rather large jump in number version.

Please Log in or Create an account to join the conversation.

  • desc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Feb 2013 16:09 #75201 by desc
I got it from UK support whilst trying to solve problems with VPNing :)

Please Log in or Create an account to join the conversation.

More
14 Feb 2013 19:38 #75202 by the pit
Strange the latest one they just offered me is version 1.0.7

Please Log in or Create an account to join the conversation.

More
14 Feb 2013 23:09 #75204 by voodle
they'll all say 1.0.7 pretty much, check the revision number, that's what changes and there are lots of revisions of 1.0.7 betas :)

Please Log in or Create an account to join the conversation.

More
28 Feb 2013 20:41 #75385 by the pit
But not version 3.0.7
Anyway I ditched the last beta from draytek as it didn't resolve upnp on the local network and broke load balancing.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami