DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

connecting o2 TG585v7 to 2820n

  • redeye76
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Aug 2010 22:19 #63432 by redeye76
connecting o2 TG585v7 to 2820n was created by redeye76
Hello everyone, first post here :roll: .

I am trying to connect the o2 box to a 2820n with a ethernet cable with the hope of using the 2820n as a wireless access point for laptops and a htcp.

internet
>----o2 box---(ethernet)----2820n----(wireless)--- other pc's

i think i have to change the ip addresses in the dhcp pool perhaps use bridge mode but frankly i dont have a clue.

any help would be much appreciated.

Please Log in or Create an account to join the conversation.

More
20 Aug 2010 08:48 #63436 by rpg
Replied by rpg on topic connecting o2 TG585v7 to 2820n
If the o2 box works fine by itself then all you really have to do is plug the LAN port of the O2 box into WAN2 on the draytek.

From the Draytek network log on to the Draytek GUI and look at WAN -> General Setup and change WAN1 to enable NO and WAN2 to enable Yes. Make sue the WAN2 Physical type is set to Ethernet.

Next go to WAN -> Internet Access -> WAN2

Make sure its on "Enable" and that on the right hand side it says "Obtain and IP address Automatically".

That should be enough to get it working correctly. If it goes into a silly reboot loop or does not work as expected unplug WAN2 and check the LAN IP ranges of both routers. If they are on the same IP range, for example 192.168.0.x, then you need to change one. On the Draytek LAN -> General Setup. Change the IP address to 192.168.10.1 and on the right hand side make sure the Start IP range is on the same network, i.e. 192.168.10.10 and the gateway is the same as you set for the IP address, i.e 192.168.10.1.

Should work fine......

Please Log in or Create an account to join the conversation.

  • redeye76
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 Aug 2010 14:50 #63450 by redeye76
Replied by redeye76 on topic connecting o2 TG585v7 to 2820n
Cheers rpg this worked like a charm

Kind regards
Sean

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami