DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Set outgoing IP to be used

  • oliverm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Jun 2010 11:36 #62396 by oliverm
Set outgoing IP to be used was created by oliverm
Hi,

With a Draytek 2910 (FW 3.1.2) is it possible to assign a particular external IP to a given internal machine so that when that user surfs the web he appears to be using an external IP on our range but not that of the WAN port ?

I dont want any traffic to come in to his machine, just set it so that his machine has it's own external IP.

Thanks

Olly

Please Log in or Create an account to join the conversation.

More
17 Jun 2010 14:44 #62398 by voodle
Replied by voodle on topic Set outgoing IP to be used
Since you don't want port forwarding in to it but want to lock the IP it uses for internet access, you'll need the latest (3.2.4) firmware which has Address Mapping under the NAT menu, that lets you specify which external IP to use for a LAN client. Alternatively, if you can't update the firmware, set that IP as the DMZ, which will do that same thing.

Please Log in or Create an account to join the conversation.

  • oliverm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Jun 2010 09:32 #62449 by oliverm
Replied by oliverm on topic Set outgoing IP to be used
The draytek support site shows that the latest firmware for the 2910 is 3.2.3.1. Is 3.2.4 available somewhere else?

Please Log in or Create an account to join the conversation.

More
23 Jun 2010 09:54 #62450 by rothers
Replied by rothers on topic Set outgoing IP to be used
ftp://ftp.draytek.com

Please Log in or Create an account to join the conversation.

  • oliverm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Jun 2010 10:01 #62451 by oliverm
Replied by oliverm on topic Set outgoing IP to be used
Getting there. 3.2.4 is on the FTP site but no matter what we do when we download and open it it shows as corrupt.

Please Log in or Create an account to join the conversation.

  • oliverm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Jul 2010 09:27 #62787 by oliverm
Replied by oliverm on topic Set outgoing IP to be used
Ok, got the download an upgraded the device.

However, I can't anywhere to set the external IP that a machine uses. I can't see anything that wasn't there before in fact.

Do you know what settings I should be looking at ?

Olly

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami