DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820N Connection after LAN IP change

  • dickster
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Apr 2010 16:00 #61776 by dickster
2820N Connection after LAN IP change was created by dickster
Hi,

I've had a look through the topics but can't find an answer.

I have had a 2820N for 5months and has worked flawlessly. I had to add some more machines/access to the internal LAN and Internet etc, and as I had forgotten the password I rebooted to Factory defaults.

Inputted all the data and fine. Have access from machines out to/from the internet. But nothing on the LAN - which is understandable as the servers have there pre-arranged IP addresses.

So then I change to LAN IP to one that suits all the servers on the network (the one the router was at before I rebooted) and now I get NO internet. The connection is made with my ISP and IP address issued, and having spoken to them they can verify my connection, but no machines/smart phones on the network display any web pages. Machines access internal LAN without an issue. If I change it back to 192.168.1.1 everything is back to normal internet wise, but the servers aren;t accessible.

Can anyone tell me where I've gone wrong ? What needs ticking or unticking ?

Cheers

Please Log in or Create an account to join the conversation.

More
28 Apr 2010 10:30 #61808 by davegarratt
Replied by davegarratt on topic 2820N Connection after LAN IP change
Is the gateway address on the LAN PC's hard coded for the Routers LAN address before you changed it ?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami