DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2766 and SiP trunks

  • mitelman3300
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Jan 2024 11:49 #103144 by mitelman3300
Draytek 2766 and SiP trunks was created by mitelman3300
Hi I have a Draytek 2766 connected to a Gamma Sogea DSL line for SiP trunks. It has been configured and works well. However on two occasions the Lan 1 config has changed back to the default 192.168.1.1 and DCHP enabled.
The Wan settings, username and password, firewall,NAT settings are not affected? If I remote in and change Lan 1 to the correct ip address it then works OK again.

Obviously when the Lan changes the PBX loses the SiP trunk as its not on the same Lan as the PBX.

It seems to last about a week before it resets, I have checked the settings but can't find anything wrong....is there a timer or something?
Firmware is 4.4.3_BT.
Any help welcomed

25.01.24 I have now defaulted router and reloaded Firmware 4.4.3_BT just in case there is any corruption in the build......see what happens

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami