Greetings

Does anyone have an idea about modem codes used by DrayTek (for the 2762)?

For example, for the STD firmware, they provide 776d07_772801 & 774307_771801. Which of these is the VDSL or the ADSL modem code, or does it not matter?

Thank you.

https://fw.draytek.com.tw/Vigor2762/Firmware/v3.9.6/DrayTek_Vigor2762_V3.9.6_release-note.pdf

That's great, thanks - I've already seen that document.

It's not clear to me, however, which of the modem codes is for VDSL and which for ADSL. The above document lists two for Annex A.

For DSL models, there will be two folders: STD and MDM. The files in MDM folder
named folder include different modem codes. If you're using a VDSL line, MDM firmware
may brings out better performance.

Thank you again for your response, but, clearly, you don't understand what I'm referring to.

I'm not talking about different types of firmware like MDM2, 3, STD, BT, but modem codes, because each of these firmware files has two modem codes, one for ADSL and the other for VDSL, as in the attached screenshot.

The question is which mode code is for which line type specifically.

[url]
https://1drv.ms/u/s!Arzk00uH22yj1wN55mfoLT8ZtPCv?e=gJq70j
[/url]

I don't know about modem codes but presumably you are aware of this :-

"Customer and service tag are used for different network environments. Customer tag is required for most ISPs while Service tag is required when ISP needs QinQ packets."

Does your ISP require QinQ packets (whatever they are) ?