DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Loopback Configuration in Vigor 2962 and 3910

  • gopara
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Mar 2022 18:56 #100772 by gopara
Hello everyone,

We are very new to DrayTek products and would like to know how to configure a loopback IP both by GUI and CLI. We've searched everywhere.
Your help will be much appreciated.
Thanks.

Please Log in or Create an account to join the conversation.

More
09 Mar 2022 12:27 #100777 by colinjmair
Replied by colinjmair on topic Re: Loopback Configuration in Vigor 2962 and 3910
NAT loopback is enabled by default on Draytek routers, I don't know if it can be turned off.

Please Log in or Create an account to join the conversation.

  • gopara
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Mar 2022 12:51 #100778 by gopara
Thank you. We would like to configure that with our own static IP address.

Please Log in or Create an account to join the conversation.

More
09 Mar 2022 17:03 #100780 by admin3
Maybe you mean like the loopback feature on the 2865?

Loopback Interface
Enable Loopback Interface ?
Note:
1. Management from WAN only available using Loopback IP, the WAN IP will not respond.
2. Source IP used for TR069,NTP,RADIUS/TACACS+,SYSLOG,SNMP.



That might need to be implemented as a new feature on the 3910/2962



Forum Administrator

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami