Expired

X. WAN

Expired

Setting up ADSL Internet Access with KC (Kingston Communications)

Products:
Vigor 120
Vigor 130
Vigor 166
Vigor 2620Ln
Show all

Keywords:
ADSL
Internet Access
KC
KCOM
Show all

Setting up ADSL Internet Access with KC (Kingston Communications)

KC use different ADSL settings to BT. DrayTek routers are pre-configured with the ADSL settings which BT use but it's straight forward to change the settings so that the router can be used with KC. If your ISP is BT, please read this guide.

The instructions below explain how to setup a DrayTek router with KC (Kingston Communication / KCOM)

1. Logging into the router

Accessing the router's GUI

The PC should be connected to one of the LAN ports on the router. Wireless could also be used, in which case the PC should be connected to the router's SSID ('DrayTek') already; the WPA2 password is printed on the underside of the router.

Open a web browser on the PC and type http://192.168.1.1 (default IP address of the DrayTek router)

The following prompt will ask for the router’s username and password. The default is “admin/admin” for Username/Password (The password should be changed at the earliest opportunity, from the system maintenance menu). Click Login to open the web user interface (WUI).

 

 

How do you rate this article?

1 1 1 1 1 1 1 1 1 1

First Published: 04/04/2016
Last Updated: 22/04/2021