VigorAP 902
- Business-class wireless access point
- 802.11ac (866mbps) & 802.11n (300mbps)
- Simultaneous dual-band (2.4/5Ghz)
- Support for 5Ghz Extended Channels (100-140)
- Gigabit Ethernet Switch (4+1 Ports)
- Centrally managed or standalone operation
- Central Management supports mobility, load-balancing, monitoring, status, upgrade and configuration
- Local temperature monitoring/logging
(Optional thermometer accessory required) - Can be powered by supplied PSU or standard 802.3af PoE (Power-over-Ethernet)
- WPA2 Wireless Encryption
- Repeater/Bridge/Access Point & WDS
- Time-Scheduled Operation
- Bandwidth management per SSID
- 802.1q VLAN Tagging
- Client Isolation & Multiple SSIDs
- MAC Address Filtering
- Radius / WPA & 802.1x User Authentication
- Built-in Site Surveyor
- Wall Mountable
Overview
VigorAP 902 Dual-Band 802.11ac Wireless Access Point
The DrayTek VigorAP 902 is a wireless access point which can be operated in standalone or centrally managed/monitored mode (with the use of a central DrayTek management product - see later).
The VigorAP 902 is a high specification professional access point providing reliable and flexible coverage to all manner of applications. A vast array of security and management features helps the AP to improve and protect flexibility and integrity of your wireless LAN.
The VigorAP 902 is ideal for adding wireless connectivity to an existing LAN, or for expanding the range of an existing wireless LAN by using the WDS repeater features.
Simultaneous Dual-Band Operation & Extended 5Ghz Bands
The VigorAP 902 supports simultaneous operation of the common 2.4Ghz band and faster 5Ghz band. The 5Ghz band is far less congested so if your PCs or other devices support the 5Ghz band, you can use that. The 5Ghz band is used for 802.11ac (or optionally 802.11n and 802.11a). The VigorAP 902 operates both bands at the same time, allowing your devices to use either band and each has its own bandwidth so overall wireless capacity is also increased. The 5Ghz interface supports the full range of extended domestic 5Ghz channels, thank to its support for DFS/TPC; you can select all 5Ghz channels up to channel 140, as opposed to just the 4 'Band A-Lower' channels (which provides only two non-overlapping channels).
It has support for Band Steering which can be configured to guide clients that are able to connect to 5GHz wireless networks onto this band instead of the more congested 2.4GHz band, which results in client connections being shared between the two frequencies more evenly, potentially increasing the number of wireless clients that can be connected to each Vigor Access Point.
Wireless Security & VLANs
The VigorAP 902 features multiple levels of wireless security. Encryption using WPA2 (802.11i) is available and you can also use the access control list (ACL) to specify the hardware addresses of clients which are permitted to connect (by MAC hardware address). Any unauthorised hardware is refused access.
For additional user authentication, you can activate 802.1x RADIUS (Remote Authentication Dial-in User Service) which allows you to centrally manage and store user names and passwords either within the AP setup itself (thus not needing any external server) on an external radius server which can permit time limited, temporary or continuous access to your clients as required.
The VigorAP 902 supports the 802.1q VLAN protocol so that if it is connected to an 802.1q enabled LAN, it can split tagged data (whether it's different subnets or intended for different users) and broadcast each on its own SSID. This means, for example, that your guest WiFi access is provided on a separate isolated SSID with no access to your company data.
Central Management with DrayTek VigorACS
The DrayTek VigorAP 902 can be managed by the DrayTek VigorACS central management system - a cloud platform which can manage most DrayTek products - routers, wireless access points and Ethernet switches, giving you complete visibility and control of your DrayTek product estate, even without a DrayTek Vigor router on site.
The DrayTek VigorACS management system can be used to configure and provision DrayTek VigorAP access points, similarly to performing these actions through the VigorAP's web interface, with a familiar menu layout in the Configuration section of VigorACS.
Profiles for groups of access points can be provisioned in VigorACS by selecting a VigorACS network, then accessing Configuration > AP Profile to configure profiles and apply them selectively.
DrayTek's VigorACS management monitors the VigorAP 902, with a Dashboard view giving a central overview of the most important information from the VigorAP's current status.
Managing a VigorAP in VigorACS
For further details of the VigorACS central management system, click here .
Central Management with a DrayTek Router
Provision & Manage VigorAPs with a DrayTek Vigor router
For further details of the central management feature, click here .
The VigorAP 902 can operate in standalone autonomous mode, but can also form part of a centrally managed wireless installation by adding a compatible DrayTek wireless controller such as the Vigor 2862 router. This enables you to centrally control, manage and administer multiple AP devices installed around your building/campus. Management also enables efficient usage of your wireless access point through load-balancing, whereby wireless clients are distributed across several access points to reduce congestion.
The DrayTek router operating as the wireless controller can provision DrayTek VigorAP access points using the Central AP Management profiles configured on the router, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network.
Power-over-Ethernet
The VigorAP 902 has built-in PoE (Standard IEEE 802.3af Power over Ethernet) as standard. Connect the VigorAP to a PoE-enabled Ethernet switch or PoE injector to power it without local power to the unit (power supply) - the VigorAP 903 will take its power from the Ethernet cable. The VigorAP 902 supports Gigabit PoE (if you have a Gigabit PoE switch/injector) such as our VigorSwitch P1280 or P1092 models (or any other 802.3af/at device).
PoE is ideal for situations where you do not have mains power available in the exact location where you want to install the VigorAP 903 or just for general aesthetic neatness, perhaps where the AP is installed somewhere prominent.
The DrayTek VigorAP 902 is also supplied with an AC/DC mains PSU for installations where you are not using PoE.
Gigabit Ethernet Ports
The VigorAP 902 has five wired Ethernet ports (separated into two distinct separated LANs). LAN A and LAN B can be fed separately and in turn broadcast on independent and isolated SSIDs. As the ports are all Gigabit, you can be sure that the AP is fed at the maximum speed in order to fully satisfy the full speed of both 2.4GHz and 5Ghz bands simultaneously.
The four ports on LAN A are particularly of use if you are using the AP as a wireless bridge as you can then connect wired PCs or devices to it. LAN Port 3 on LAN-A is also used as the PoE input if you're powering the AP by PoE.
Local Temperature Logging and Alarm
This facility is ideal for detecting if any part of your building is over or under-heated or if heating/cooling has been left on overnight and therefore helping to make more efficient use of your heating or cooling energy consumption, potentially saving cost.
The VigorAP 902's USB interface can alternatively connect to a regular printer. That printer is then accessible from any wireless or wired PC which connects to the VigorAP 902, or a PC anywhere else on the network. This is ideal to provide printer access to wireless laptops but could also be used for installing a printer elsewhere in your home/office by using a pair of VigorAP 902s to make a bridge.